Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun May 19, 2013 9:14 pm

View unanswered posts | View active topics


Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours


 

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
magnumair
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 5:51 am 
Offline

Joined: Fri Nov 10, 2006 12:02 am
Posts: 1032
Location: CANADA
I sent you a pm by mistake, to early I guess. I was just wondering where one could get such a pistol. Can not read the French link. Thanks



George.
Top
 Profile  
 
Sponsored Links
Top
 
DocGadget
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 7:53 am 
Offline
User avatar

Joined: Sat Nov 06, 2010 8:53 am
Posts: 4598
Location: Montreal
Basicaly he's saying that with the longer barrel you can't use the rail under the pistol because the longer barrel goes way back and that the 4th pump is VERY powerful but VERY hard to cock. He paid 195 euros for it, seems he ordered it from Bulgary, it wasn't pack well enough and when he received it the case was cracked.

_________________
Facebook is a lot like ancient Egypt, people write on walls and worship cats.


Last edited by DocGadget on Fri Feb 11, 2011 9:05 am, edited 1 time in total.

Top
 Profile  
 
randyhub
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 8:46 am 
Offline
User avatar

Joined: Thu Sep 01, 2005 12:45 pm
Posts: 4796
Location: Calgary
Yeah this excellent design is the one to watch for sure. Personally I think this platform is going to garner the same type of following the Airforce products do in regards to modding.

Having put a few 1000 pellets thru mine without a hitch it is my fav for just point, shoot, and hit. As well anyone I want to introduce to airgunning I just hand them my Zoraki and as it shoots so easy they immediately enjoy the sport as opposed to getting frustrated because they can't hit anything.

After taking mine apart I am very impressed with both the design and quality just as Walter stated these air pistols are very beefy.

Seems they are also getting the same results with the Ultra I am getting as far as accuracy is concerned with a longer barrel. One of the benefits of actually having one of these to shoot is you can actually make accurate comments and observations that benefit other forum members as opposed to looking somewhat unintelligent.

Image
Image
Image
Image

Randy

_________________
.25 will always leave a bigger hole in and out it's just that simple, but then again 9mm is a big pill. :)
Image
Top
 Profile  
 
TCooper
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 1:26 pm 
Offline
Site Moderator

Joined: Sat Sep 03, 2005 9:25 am
Posts: 3047
Location: Ontario, Canada
The new Ultra version sounds interesting. Unfortunately it doesn't have much usefulness in Canada. A restricted air pistol is too limiting in usefulness. I still enjoy plinking in rural gravel pits and it's nice for people to take camping or as a grouse killer when moose/deer hunting. The original Zora-lecto meets our Canadian velocity limits.

Cheers,
Todd
Top
 Profile  
 
moltogordo
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 1:59 pm 
Offline
User avatar

Joined: Sat Jan 24, 2009 2:47 am
Posts: 1906
I want to see a rifle/carbine version of this action become available. I'd buy one instantly, PAL or detuned - don't care. Shouldn't take much design change to put the pumping mechanism under the barrel.

The 2289 now being deceased, we need a new icon in this category.
Top
 Profile  
 
randyhub
 Post subject: Re: Zoraki HP-01 Ultra
PostPosted: Fri Feb 11, 2011 8:09 pm 
Offline
User avatar

Joined: Thu Sep 01, 2005 12:45 pm
Posts: 4796
Location: Calgary
Can't see them changing the valve design as the very few failures were attributed to over pumping.

Plus the valves are readily available for 70.00 here in Canada.

Very few powerplants are making this kind of power unlike 2289s which take so many pumps.

Randy

_________________
.25 will always leave a bigger hole in and out it's just that simple, but then again 9mm is a big pill. :)
Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours



Who is online

Users browsing this forum: Google [Bot] and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO