Gentlemen,
It gives me great pleasure to introduce the HOT & HORNY DC30 HAND CANNON!!!!!
If you haven't read my DC25 thread I will just be picking up from there.
topic69188.htmlLet's first go over the parts and mods that went into the Bigbore conversion.
All work was carried out by none other the Kim The Great WhiteWolf.
The Pistol Features a 12" .300 Barrel By Sean Pero & Bob Sterne.
The breech was determined in be decent but not perfect so it was cut,
rebreeched, taper lapped & micro polished for a smooth ride in.
The Barrel length is Officially 11 7/16". The barrel was then
Ported and a custom Transfer Port Fabricated from a solid piece of Delrin
So no compromise to be seen.
A Solid piece of 17-4 1/2" Stainless Steel was also sourced from the US
For the Custom Bolt. It is a full 4" long opposed to the Factory 3.6"
For extra Weight and Clearance to the back of the Receiver
The Probe Has been made Heavier for extra push & more confident feed.
The Bolt handle is more robust then the original design and Kim has the
Highest quality Knurling That I have ever seen. I mean this bolt is Gorgeous.
As the Breech seal is grooved in the Barrel the Bolt has a Beautiful Recess
To mate together. No pictures of this one.
Tolerances are kept tight and a break in period was necessary to lead up
The breech. Rounds were fed spray on furniture polish to help with the leading process.
She has a butter smooth ride and any inconsistencies in the Rounds can be picked up
By an extra ounce of push required by the Heavy Bolt.
All in all a flawless custom system.
The Pics:
1)> full shot of the pneumatic penetrator. Note the addition of a weaver rail
And how it was mounted to the 2250 barrel band with o-rings and over the front
Grip screw. The Bipod makes for an exceptionally accurate 25m bench rest pistola.
2)> 17-4 Stainless Steel Heavy bolt and Handle. Not the Knurling quality in the Bloodknob.
3)> here is a pic of the bolt being born. She was born heavy and tall and is suitable for
Pushing any weight projectile.
4)> Micro polished breech for a butter feed of the .30 JSB's.
5)> 44.74 grain .30 cal JSB's sitting on an Accurate Molds 30-70a Boat tail by Bob Sterne
Used for the rifle but is the perfect diameter for low friction travel down the 12 Barrel.
With the spring set for Non-Pal with JSB's they still shoot surprisingly well and there flat
Face hit with a very big smack. How big?
6)> THIS BIG! The first shots right of center on the steel silhouette are from the pistol in. .25.
The only Bigbore shot the target took did far more then scratch the surface. Mind you
This was a close range but I think you get the idea. .300 Boat tails sized to a low friction
fit & High energy & 7 Bigbore Repeating shots.
It was the Bullet that broke the goats back.
Again, Special thanks to KIM, Sean, Bob, Kim, Lloyd & Kim
For making this Dreamy Venture Come together to completion.
Hope you likely.
Reaper