Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun Feb 25, 2018 2:58 am

All times are UTC - 5 hours


 

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Sat Nov 11, 2017 1:07 pm 
Offline

Joined: Thu Jun 08, 2017 12:02 pm
Posts: 10
Hello,
I am looking for a mock suppressor for the Umarex Steel Force. I believe it has to be a "QD" type as there are no threads on the barrel.

I have sent inquiries to Evike.com, Airsoft Station, and PyramidAir. Nobody is sure what will work, although I have seen several models for the airsoft guns.

I was told this one "might" work https://www.airsoftstation.com/b-t-rote ... -grey-8-9/

Are there any measurements, other than length that I should look for? will any QD type silencer for a flash hider work?

Thanks in advance for any advice.


Top
 Profile  
 
Top
 
PostPosted: Sat Nov 11, 2017 3:36 pm 
Offline

Joined: Wed Oct 29, 2014 10:49 am
Posts: 122
I have both a Steel Force and a KWA/KSC/ASG MP9 handy and I can tell you that the dimensions are completely different, so I can guarantee that the typical MP9 style faux silencers made for airsoft like this will not fit, aside from the fact that they have three lugs and the Steel Force has four.

The one you linked to fits over standard M4 flash-hiders (like the one supplied) and is definitely too small to fit. It looks like your only option is a custom fabricated model.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 3:54 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
Took me some time to find it, but finaly did...

It can be fit on top of the original flash hider, the flash hider is made of one piece it can not be removed or unscrewed. you do not need to remove it from the gun.

Modif. to make it fit, all to be done on the flash hidder:
1- very fine sanding on the front, paint tickness is just what you need to make it slide in...
2- filing a notch on top and front to make the guide pin inside so the mock suppressor do not rotate...
3- a bit of filing on both side so the lock mechanism can slide and engage...
To be done on the mock suppressor
4- driling a new hole on the grill covering the mock suppressor on opposite side. Cause if left as it is the writing are upside down on the right of the gun...

Hummm, no picture of the flash hidder, will have to fix that...

Doing it like this put's the lock facing downward.

By the way, it is 6mm airsoft...

https://shop.ehobbyasia.com/5ku-kac-qd- ... m-ccw.html


Attachments:
IMG_7572.jpg
IMG_7572.jpg [ 96.31 KiB | Viewed 422 times ]
IMG_7570.jpg
IMG_7570.jpg [ 99.84 KiB | Viewed 422 times ]

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm
Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 10:30 pm 
Offline

Joined: Thu Jun 08, 2017 12:02 pm
Posts: 10
Thank you! Will give it a try :D


Top
 Profile  
 
PostPosted: Sun Nov 12, 2017 10:12 am 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
Found this to, here in Canada... 8) . Look's the same with no marking...

http://airsoftdepot.ca/catalog/product_ ... ts_id=4400

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm


Top
 Profile  
 
PostPosted: Sun Nov 12, 2017 1:18 pm 
Offline

Joined: Thu Jun 08, 2017 12:02 pm
Posts: 10
Cool....been doing some research, seems prices vary between 36 and 80 us dollars...


Top
 Profile  
 
PostPosted: Sun Nov 12, 2017 6:19 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
lonerider wrote:
Cool....been doing some research, seems prices vary between 36 and 80 us dollars...


Depend where you are looking...

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm


Top
 Profile  
 
PostPosted: Sun Nov 12, 2017 8:54 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
Here are more detailled picture, on the supressor open and closed you can see the 2 tab that lockin the flash hider, you can also see the pin inside that supressor that slide on the notch on the front of the flash hider. To bring the lock mechanism under the notch has to be on top cause the pin inside is located on opposite side and is also the screw that hold the outer drilled skin... witch has to be rotate half a turn so the writing are upright....


Attachments:
IMG_7874.jpg
IMG_7874.jpg [ 328.5 KiB | Viewed 305 times ]
IMG_7872.jpg
IMG_7872.jpg [ 327.75 KiB | Viewed 305 times ]
IMG_7871.jpg
IMG_7871.jpg [ 305.39 KiB | Viewed 305 times ]

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm
Top
 Profile  
 
PostPosted: Sun Nov 12, 2017 9:02 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
A bit of filling where the pen is pointing need's to be lightly shaved, so the lock work's perfectly. Also the notice where the notch is on the flash hider... Straight on top...


Attachments:
IMG_7875.jpg
IMG_7875.jpg [ 332.17 KiB | Viewed 305 times ]

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm
Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 10:31 am 
Offline

Joined: Wed Oct 29, 2014 10:49 am
Posts: 122
Ignore my reply further up, I was talking about the Steel Storm. :oops:


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 2:52 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 732
Location: North Of Toronto
Here's my version Steel Force with a mock suppresor. It just locks on the muzzle brake. The muzzle brake sometimes becomes a little loose! No modding at all.


Attachments:
P1010384 (1426 x 803) (713 x 402).jpg
P1010384 (1426 x 803) (713 x 402).jpg [ 75.9 KiB | Viewed 275 times ]

_________________
Benjamin Discovery .22
Discovery 2240 Pistol .22
Umarex Steel Force (Full Mod, Barrel Extension)
KWC 1911 Tac
Top
 Profile  
 
PostPosted: Tue Nov 14, 2017 7:10 pm 
Offline
User avatar

Joined: Wed Jul 01, 2009 3:23 pm
Posts: 2894
Location: Northern Ontario
The QD cans made for an M4 are a direct fit.

_________________
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson.


Top
 Profile  
 
PostPosted: Sat Dec 02, 2017 5:18 pm 
Offline
User avatar

Joined: Sat Nov 06, 2010 8:53 am
Posts: 6140
Location: Montreal
Is it the same thing for the HK MP5 K-PDW? Would be nice to have one that can fit both...

_________________
Facebook is like ancient Egypt, people write on walls and worship cats

You can’t buy a single airgun for everything. Golfers use many different clubs, airgunners need more than one gun


Top
 Profile  
 
PostPosted: Sun Dec 03, 2017 11:42 am 
Offline

Joined: Thu Jun 08, 2017 12:02 pm
Posts: 10
Just wanted to say thanks to all that have given advice, it is very much appreciated. I have not been able to get on due to long hours at work and at home. I did purchase the suppressor that silentman had recommended. I will start the mods to get it to fit soon.


Will I need to lengthen the barrel to the tip of the suppressor in order to shoot it with the suppressor attached?

Or will it shoot straight out of the suppressor?

Thanks again


Top
 Profile  
 
PostPosted: Sun Dec 03, 2017 6:14 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 711
shoot straight out of the box after modifying the flash hider, no modif on the mock supressor itself...

_________________
TW1911, Steel Force
GSG 92, Walther CP99 Compact
BlackWater M1911A1(polished)
9XP, Glock G17 6mm
SW M'n'P 40, Crosman 357 6'', SIG Sauer P320,
SA 1911 TRS, Brodax 44, M1911A1 twin barrel 6mm.
M1911 Dragon 7'' Hi-Capa6mm


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 5 hours



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO