Own one and paid a lot more,never had to rebuild it but their is a thread on the crosman forum I get it!!
| Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
| Crosman 44 peacemaker. https://www.airgunforum.ca/forums/topic44698.html |
Page 1 of 1 |
| Author: | intrepid [ Sun Jan 22, 2012 9:31 pm ] |
| Post subject: | Crosman 44 peacemaker. |
I came across one of these at a local flea market. It looked to be in good shape and worked but the dealer said it leaked all the CO2 out in a couple of minutes. I know very little about these and was wondering what it would be worth. I think it was a .22 and he wanted 50$ for it. What do you guys think? |
|
| Author: | *SCARECROW* [ Sun Jan 22, 2012 9:44 pm ] |
| Post subject: | Re: Crosman 44 peacemaker. |
Own one and paid a lot more,never had to rebuild it but their is a thread on the crosman forum I get it!!
|
|
| Author: | pabirdman [ Tue Jan 24, 2012 8:33 pm ] |
| Post subject: | Re: Crosman 44 peacemaker. |
Thats a good price even if you have to reseal it. |
|
| Author: | intrepid [ Tue Jan 24, 2012 11:26 pm ] |
| Post subject: | Re: Crosman 44 peacemaker. |
pabirdman wrote: Thats a good price even if you have to reseal it. Thats what I was afraid I was going to hear and what I was telling myself all the way home.. Doh. |
|
| Author: | bobtodrick [ Wed Jan 25, 2012 1:22 pm ] |
| Post subject: | Re: Crosman 44 peacemaker. |
I picked up a Crosman Shiloh a year or so ago that also leaked air out in a couple of minutes. John at D&L resealed it for about (if my memory isn't failing me) $65-70. It's worked flawlessly since then and is a very 'fun' shooter. |
|
| Author: | intrepid [ Thu Jan 26, 2012 9:17 pm ] |
| Post subject: | Re: Crosman 44 peacemaker. |
Went and picked it up today. It is a .22 and made in Dunville. The .22s were made between '70 and '76 so this guy could be 40 years old, you wouldnt know it looking at it. Came with original box and I think original 500 count Crosman pellet tin with the sliding pellet door. Also two boxes of carts that look to be from the same era. Its a leaker but that can always be dealt with. Surprisingly heavy with the solid metal cylider. Thanks for the advice guys that is what made me go back to take a second look. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|