Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Mar 28, 2024 11:51 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Mar 08, 2012 2:31 pm 
Offline
User avatar

Joined: Fri Aug 19, 2011 10:55 am
Posts: 340
I thought my pistol was discharging while loading because it's trigger was set to light. So using the trigger diagram I began to adjust the screws for a heavier pull. But it turns out that was not the problem, the pistol was discharging because the breech cover-mechanism's set screw was loose. Fixed that with a bit of lock tight but now the trigger is giving me grief by locking.

The pistol only seems to have problems when it is at the range and never at home. I think I have it working properly now but I want to be sure, are there any directions online for setting the trigger back to specs? Eg: turn screw A in all the way and then back out 8-1/2 turns?

Very frustrating as I really like the pistol a lot but every shooting session has been interrupted by trigger and discharging problems.


Top
 Profile  
 
PostPosted: Thu Mar 08, 2012 3:40 pm 
Offline
Site sponsor and moderator
User avatar

Joined: Sat Feb 04, 2006 11:53 pm
Posts: 6427
Location: Surrey B.C.
Hope this helps

http://www.pilkguns.com/tenp/spizh46.htm

http://www.airgunarena.com/index.php/IZH-46M_(Izzy)_Air_Pistol

_________________
If you think education is expensive, try ignorance.


Top
 Profile  
 
PostPosted: Thu Mar 08, 2012 3:48 pm 
Offline
User avatar

Joined: Fri Aug 19, 2011 10:55 am
Posts: 340
Thanks,

I've seen the first link before (it was the one I originally used to increase the pull) but haven't seen the second.

I really should have documented how much I turned each screw so I could set it back.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO