Canadian Airgun Forum

Well the final mod to my lil Beeman is almost complete. Bought flip up scope covers (absolute joy!) and am now putting a sling on it. I walk around with this thing in the woods anywheres from 4 to 10 hours at a stretch so a sling is gonna be great.

I'm wondering if my plan will work for attaching it so jump in and let me know if anything seems goofy to you.

I bought the Mossy Oak Rifle Sling Mounting Kit that comes with the screws and the so forth but it also comes with a nut and bolt. My plan is to drill the proper hole in the butt and epoxy and screw in that one as normal but for the front one I was planning on using the nut and bold part and have it off to the side and cutting off any excess bold and lock tighting it down or something. Does this sound proper?

What do you do to attach sling mounts for your break barrel? Thanks in advance for any and all advice.

_________________

eastcoastairgunner.com

Not as cheap as a bolt but this method keeps the sling away from the break action.
They are available for different barrel diameters. Mine fastened very tight, hasn't moved.
Harry

_________________
The things that come to those who wait, may be the things left by those
who got there first

Oooh, that's nice Harry. Where does a feller get hold of one of those?

_________________

eastcoastairgunner.com

I got mine from Amazon.ca , seller was Archer Full Throttle International and make is Bushnell. I remember doing research of different models for the correct diameter of my barrel. Once I had the model number I searched for someone who sold it (Canada).

Harry

_________________
The things that come to those who wait, may be the things left by those
who got there first

Hmmm, that was what my order said... but here is a photo of what I got.

Harry

_________________
The things that come to those who wait, may be the things left by those
who got there first

When I plan to sling my hw98, I'm going get the clamp. Measure the barrel and get the right size! Looks cool too! Thats how I sling'd my hw97, and has failed me yet. I cant imagine drilling a hole in the front stock

Crikey! I saw one of those today at CT and didn't realize what it was! I'll pick one of those up me thinks.

_________________

eastcoastairgunner.com

Turns out that Bushnell owns the Uncle Mike's line.
Harry

_________________
The things that come to those who wait, may be the things left by those
who got there first

I think this is the one I saw today

http://www.canadiantire.ca/en/pdp/uncle ... 2352p.html

_________________

eastcoastairgunner.com

Yup, that is the same one I got and it's a few dollars cheaper as well.... darn!
Harry

_________________
The things that come to those who wait, may be the things left by those
who got there first

Awesome, I'll pick it up for sure then

_________________

eastcoastairgunner.com