Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Custom bullpups pcp https://www.airgunforum.ca/forums/topic45054.html |
Page 1 of 2 |
Author: | SomeGuy [ Sun Feb 05, 2012 3:56 pm ] |
Post subject: | Custom bullpups pcp |
How many people would be interested? I would charge 300 excluding the gun and parts. Would have to be electric trigger and min length. |
Author: | JAG1 [ Sun Feb 05, 2012 8:00 pm ] |
Post subject: | Re: Custom bullpups pcp |
very interested |
Author: | talo [ Mon Feb 06, 2012 9:26 pm ] |
Post subject: | Re: Custom bullpups pcp |
JAG1 wrote: very interested So what do you think you're looking at as far the rifle you will want changed to Bullpup ?? Italo |
Author: | Helipilot [ Tue May 01, 2012 9:09 pm ] |
Post subject: | Re: Custom bullpups pcp |
Pics of completed projects? |
Author: | Castle02 [ Tue May 01, 2012 9:28 pm ] |
Post subject: | Re: Custom bullpups pcp |
I don't think bullpups are allowed in Canada. |
Author: | bodie613 [ Tue May 01, 2012 10:03 pm ] |
Post subject: | Re: Custom bullpups pcp |
Castle02 wrote: I don't think bullpups are allowed in Canada. Thats actually not true at all. |
Author: | idontknowjack [ Tue May 01, 2012 10:06 pm ] |
Post subject: | Re: Custom bullpups pcp |
Not true at all? or partially true? |
Author: | Chewy [ Tue May 01, 2012 10:20 pm ] |
Post subject: | Re: Custom bullpups pcp |
Depending on what you can convert I'd hear ya out. Certainly need to see some completed work. Shipping charges and parts + your fee means $500+ and that is still needing a gun |
Author: | FRANK [ Wed May 02, 2012 8:20 pm ] |
Post subject: | Re: Custom bullpups pcp |
Interested but I need pic's and what is a bullpups pcp airgun? <--- I'm French so I don't use the same terms? maybe. |
Author: | rsterne [ Wed May 02, 2012 8:25 pm ] |
Post subject: | Re: Custom bullpups pcp |
It's reallly confusing.... Bullpup stocks are PROHIBITED in Canada.... However, some Bullpups are OK providing they can't be fired with the stock removed and are over ~26" long, IIRC.... Best to do your reading on the CFC Website before going down this road.... Bob |
Author: | daguasta [ Thu May 03, 2012 6:37 am ] |
Post subject: | Re: Custom bullpups pcp |
FRANK wrote: Interested but I need pic's and what is a bullpups pcp airgun? <--- I'm French so I don't use the same terms? maybe. here is an example of the hatsan done as a bullpup http://www.youtube.com/watch?v=D782cbzq ... h_response |
Author: | bodie613 [ Thu May 03, 2012 4:10 pm ] |
Post subject: | Re: Custom bullpups pcp |
rsterne wrote: It's reallly confusing.... Bullpup stocks are PROHIBITED in Canada.... However, some Bullpups are OK providing they can't be fired with the stock removed and are over ~26" long, IIRC.... Best to do your reading on the CFC Website before going down this road.... Bob Where did you get that info? I was under the impression that they aren't illegal at all and it was just common misconception. |
Author: | DocGadget [ Thu May 03, 2012 4:47 pm ] |
Post subject: | Re: Custom bullpups pcp |
FRANK wrote: Interested but I need pic's and what is a bullpups pcp airgun? <--- I'm French so I don't use the same terms? maybe. Here you go Frank: I only picked some Hatsan PCP so you have a better idea of the dimensions and what is needed to achieve it. |
Author: | FRANK [ Thu May 03, 2012 5:56 pm ] |
Post subject: | Re: Custom bullpups pcp |
thanks guys, now Im smarter....uhhhh.... no Im more educated. |
Author: | paddyfritz [ Fri Jun 15, 2012 6:05 pm ] |
Post subject: | Re: Custom bullpups pcp |
I would assume non pal bullpups are ok ? |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |