I built one up, or rather used it as a starting point, for my grandson. It has a good sight, much better than a 2240, and it has a steel breech . Now the breech is a short model, so IMHO not as good as the one on a 2300S, nothing really wrong with it but not just the extra real estate if you want to mount a scope or red dot, and not as much support for the rear portion of the barrel. Trigger, it does have an adjustable sear spring but that's the only improvement. You can do a real simple upgrade by changing to a supersear and polishing the surfaces where that sear contacts the trigger and the hammer, makes aworld of difference, or go the bigger bucks route and put in a 1701p multi lever trigger assembly and a hammer, this one is much more adjustable, a two stage trigger . Honestly having done several, I think the supersear is a good comprimise, one I have is actually better than the 1701p trigger at about 1/3 the cost. I did use a roller trigger with the supersears, I wanted a wider trigger face so that negated much of the cost difference.
|