Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun Apr 28, 2024 11:06 am

View unanswered posts | View active topics


Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
Go4Robby
 Post subject: Warrior V2 Compressor
PostPosted: Mon Jun 05, 2023 4:35 pm 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
It finally happened, after a year and a half of trusty service, my Warrior V2 compressor will not pump air anymore. Something happened while filling a gun, and it’s not making the same noise as it was before and can’t build up pressure. I’ve ordered a repair kit from CSS but I’m wondering if any of you gentlemen ever repaired one ? If so, what should I be looking out for ? Any help would be appreciated.

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
McRobert
PostPosted: Mon Jun 05, 2023 5:43 pm 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 566
Location: East Of Hamilton
Post some pictures of yours apart. I believe I have a complete cylinder, guide housing slider and crank bearing, on the shelf. If you need something fast I can send it out.
Top
 Profile  
 
Go4Robby
PostPosted: Mon Jun 05, 2023 5:46 pm 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
McRobert wrote:
Post some pictures of yours apart. I believe I have a complete cylinder, guide housing slider and crank bearing, on the shelf. If you need something fast I can send it out.


Will do ! Much obliged

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
WoodWelder
PostPosted: Mon Jun 05, 2023 6:52 pm 
Offline

Joined: Sun Jan 01, 2023 4:05 pm
Posts: 733
Will this help?

https://www.youtube.com/watch?v=CVjPaOQ_jR8
Top
 Profile  
 
Go4Robby
PostPosted: Mon Jun 05, 2023 7:08 pm 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
WoodWelder wrote:
Will this help?

https://www.youtube.com/watch?v=CVjPaOQ_jR8


Yes I saved this exact video for disassembly

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
Go4Robby
PostPosted: Sat Jun 24, 2023 11:42 am 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
Looks like my problem was with the motor axle, it sheared off completely. Looks like a need a new motor. Any idea where I can get a replacement ?

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
Dukemeister
PostPosted: Sat Jun 24, 2023 12:04 pm 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON
Almost certainly you can source a replacement motor.See if you can find the specs somewhere on a label attached to it.
However, it may also be possible to put a coupling between the two halves of the sheared off motor shaft. Can you post a pic of the failed shaft? Usually a motor shaft will fail at the end of the keyway due to rough machining and stress concentrations.

_________________

))))----//----------==
Iacio, ergo sum
Top
 Profile  
 
Go4Robby
PostPosted: Sat Jun 24, 2023 12:31 pm 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
Dukemeister wrote:
Almost certainly you can source a replacement motor.See if you can find the specs somewhere on a label attached to it.
However, it may also be possible to put a coupling between the two halves of the sheared off motor shaft. Can you post a pic of the failed shaft? Usually a motor shaft will fail at the end of the keyway due to rough machining and stress concentrations.


Thought about it but at this point this is beyond repairing/my abilities to repair it. Wes told me his uncle fixes them for him so I might try that. Beyond that, it had a good life and I also realize I wasn’t the smoothest of users after watching to maintenance vids. You live and learn.

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
McRobert
PostPosted: Sun Jun 25, 2023 6:17 am 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 566
Location: East Of Hamilton
If this is your motor then it seem not worth a repair, due to the cost https://www.aliexpress.com/item/1005004433320440.html?spm=a2g0o.productlist.main.3.63f5ERvTERvTeG&algo_pvid=062f4579-bac3-4b6d-9973-27fb07808a7b&algo_exp_id=062f4579-bac3-4b6d-9973-27fb07808a7b-1&pdp_npi=3%40dis%21CAD%2183.2%2183.2%21%21%21%21%21%4021021f7b16876916023643116d076d%2112000029167464786%21sea%21CA%214381166741&curPageLogUid=48W5hB4fIv21
Top
 Profile  
 
Dukemeister
PostPosted: Sun Jun 25, 2023 6:44 am 
Offline
User avatar

Joined: Fri Jan 22, 2010 1:17 pm
Posts: 4167
Location: Kingston, ON
McRobert wrote:
If this is your motor then it seem not worth a repair, due to the cost https://www.aliexpress.com/item/1005004433320440.html?spm=a2g0o.productlist.main.3.63f5ERvTERvTeG&algo_pvid=062f4579-bac3-4b6d-9973-27fb07808a7b&algo_exp_id=062f4579-bac3-4b6d-9973-27fb07808a7b-1&pdp_npi=3%40dis%21CAD%2183.2%2183.2%21%21%21%21%21%4021021f7b16876916023643116d076d%2112000029167464786%21sea%21CA%214381166741&curPageLogUid=48W5hB4fIv21

Actually, cost is about $170 (looks like the pricing model on alliexpress for such items is to undervalue the product and overcharge shipping to evade import duties/taxes) so it's about half the price of a new one from China, and may be worthwhile. Also, it seems there is a gearbox attached to the motor, so if the gearbox shaft is the one that's broken, "one" could machine a replacement - so it's fixable in the right hands. A motor shaft would be difficult since the armatures winding etc are attached. but a gearbox shaft is a relatively straightforward job. I realize it's beyond the OP's workshop so the unit is in the parts bin for him.

_________________

))))----//----------==
Iacio, ergo sum
Top
 Profile  
 
Normk
PostPosted: Sun Jun 25, 2023 7:49 pm 
Offline

Joined: Sat Jul 11, 2020 5:36 pm
Posts: 819
Location: Chilliwack, BC
Here are some photos of one of that type of compressor, in case these are of some value to someone.

https://www.dropbox.com/scl/fo/ma5ear2q ... 55csslcp2n

_________________
Slavia 618 .177
Webley Senior .22
Jelly SUPER 4.5 mm
Webley Viscount .177
Kral Mega Marine Walnut .22
Artemis PP750 .22
FX Streamline .22 walnut
FX Streamline .22 composite
FX Dynamic 500 .22
Top
 Profile  
 
McRobert
PostPosted: Tue Jun 27, 2023 6:15 am 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 566
Location: East Of Hamilton
Can you post a picture of the break?

Thanks
Robert
Top
 Profile  
 
Go4Robby
PostPosted: Tue Jun 27, 2023 10:26 am 
Offline

Joined: Sat Oct 31, 2020 1:40 pm
Posts: 105
McRobert wrote:
Can you post a picture of the break?

Thanks
Robert


I left the compressor at my cabin, i'll try and get you pics this weekend if i don't forget :D

_________________
Current owner of :
Diana 280 T06 .177
QB78 Deluxe .22
Diana Outlaw .177
Benjamin Marauder .177/.22/.25
Benjamin Armada .25
HW 80 .22
HW100KT .22
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO