Well it’s about time I start my PR900 review

View unanswered posts | View active topics

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Well it’s about time I start my PR900 review

Page 3 of 3

[ 34 posts ]

Go to page Previous 1, 2, 3

Print view

Previous topic | Next topic

Author

Message

Daryl

Post subject: Re: Well it’s about time I start my PR900 review

Posted: Wed Dec 27, 2023 9:59 pm

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11369
Location: P.G. B.C.

A problem with added lubes, can cause a problem with buildup or running out of lube. As to lubes, the one that doesn't seem to build up is Lyman' Super moly spray.
It's an excellent lube and seems to stabilize in the bore after just a few shots. When applied to CF bullets, it can take up to 10 shots to stabilize, then seems to shoot
centre forever.
I switched back and forth between molied cast bullets in the Condor, with the Hades pellets, not sprayed. I might try spraying some for a test, come spring.

_________________
Best Wishes
Daryl

Top

Knappr

Post subject: Re: Well it’s about time I start my PR900 review

Posted: Wed Dec 27, 2023 10:10 pm

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

Within 5-10 shots ( freshly polished bore) before the POI became consistent.

Right now I’m just using lubed pellets to season the bore, then switching back to standard lead, the accuracy has remained the same so far. I’m not to far into this experience, so much could change. Loving it so far.

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

Knappr

Post subject: Re: Well it’s about time I start my PR900 review

Posted: Fri Dec 29, 2023 11:00 pm

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

One thing that always bothered me about this rifle but wasn’t enough for me to dislike this rifle was the grip size. Being a bit short and narrow my baby finger kept feeling lost as it floated around below the grip.

Attachments:

53159BC5-AE99-4330-A5EC-F79BEFF6B8DF.jpeg [ 166.22 KiB | Viewed 159 times ]

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

Knappr

Post subject: Re: Well it’s about time I start my PR900 review

Posted: Fri Dec 29, 2023 11:13 pm

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

I used some walnut I had laying in the burn pile. Using a hole saw I cut a circle bigger then the stock. I then used a coarse file and flattened the bottom of the stock the best I could without removing too much. I then located the Center point on the freshly cut stock surface and drilled a hole for a wood screw. I then screwed the walnut to the bottom. Then I traced the best I could then removed for shaping. 5 minutes on a belt sander and it was ready. I then Glued it on with a smear of JBWeld, once dry I removed the screw and drill that hole out to 5/16” then glued dowel into the hole. Once dry, I sanded the dowel down to a flush look and sealed it with low gloss sealant.

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

Page 3 of 3

[ 34 posts ]

Go to page Previous 1, 2, 3

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum