Canadian Airgun Forum

Seen this on ScopesAndAmmo.com, and Im intrested. I know its not a top quality .22 rifle, but it looks like a good rifle. Anyone have any feedback on the rifle, or the website? Thanks

You can't go wrong dealing with Eric....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal; Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!

You can't go wrong with a B2, I have an XS-B2-2A .22, and it's a great shooter, very accurate, and it's built with ordnance grade steel, and Chinese Beechwood stock, and it can be very powerful as well, that part's up to you. The one I have was bught in the US, so it hasn't been de-tuned and shoot's a consistant 550fps, add 200fps w/ a quality spring change,,All in all, I would have to say it's a good move to buy one, and w/ Eric you're getting some real integrity pricing. Cheer's, Andy.

_________________
QB-78-D .22 w/Fitco 4-16x44ATL
QB-57-D .22 w/Fitco 2-7x32k
2x,.XS-B4-2A .177&.22 w/Fitco 3-9x40
XS B9-1 w/AimPoint CompM2
XS B2-2A .22 w/Simmons 3-9x40
TAC1 Extreme w/BSA 3-9x40/Var,. Kit
2240/2289g w/Tasco 2-6AOE
Gamo Recon w/ Fitco 2-7x32K

what spring would be a good quality and would fit?
thanks
what about replacing the piston?

_________________
-Quest500(3500Boxer,2500PercisionMax,30Accupel)
-B4(175HyperVelocity,1000CrossWadcutter,500CrossHollow)
-357(Dead)(250HyprVelo,470Accupel,550Boxer,1000Round)

I have to tighten the screws after every shoot, but overall a pretty decent .22

_________________
BS HB.22, BS EB.22, S&W MP8, IZH 60, BERETTA PX4

Loc-tite em.

_________________

Im definetly gonna try good thinking

_________________
BS HB.22, BS EB.22, S&W MP8, IZH 60, BERETTA PX4

i can't speak specificlly of the b-2 (22) but i had a b2 (177) and i loved it. bought it new for 40$ and when i got it - it would shoot through a tims paper cup-seriously!!!! but i put another 50 shot downrage and it started to work fine. mine had a very long trigger pull- not crips at all, crappy wood, not really nice maching or bluing but:

it was pretty accuarte
is was fun
it always works

and heres the best part (besids the 40$)

because it was a cheap gun???
i didn't baby it or worry about lending it to a freind while camping sitting around a camp fire
or surprovised kids to learn about shooting (not )
i didn't expect to hit a dime at 100yards
it was just plain fun that i didn't have to baby at all and i still hit everything i aimed at!!!
there was not pressure with that gun to preform-just fun

so.....yes- not bad- even with all its faults
i loved that gun

_________________
my other coil is a sub ohm
sub 500 .22 Crosman Phantom 500 open sites
sub 500 .177 Crosman TR77 NPS 4-16x40 UTG
sub 500 .177 Hatsan mod 33 with Quattro trigger open sites