Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Mar 28, 2024 11:36 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sat Aug 29, 2009 9:03 pm 
Offline
User avatar

Joined: Sun Jun 11, 2006 8:43 pm
Posts: 1762
Location: Montreal, Quebec.
into a pumper valve.. It will need two slots milled for outter o-rings near the ass-end and also that area (the inside) needs to be machined to fit a valve check. If possible the inside of the valve should be bored too for extra valve volume and the other valve half that connect to it too (for better flow). A custom valve stem will be needed too (sniper's would be good if it can hold 2000+ psi without colapsing). Also the O.D. of the hole valve must be reduced to fit into a 2260 tube if it happens to be bigger, 3 retention screw holes will be needed also on the valve (the exhaust valve half part). That pretty sums it up on what I need!

_________________
Image


Top
 Profile  
 
PostPosted: Sat Aug 29, 2009 9:34 pm 
Offline

Joined: Mon Sep 05, 2005 10:55 pm
Posts: 6936
Location: Rocky Mtn Hse Alberta
Kinetic_Genius wrote:
into a pumper valve.. It will need two slots milled for outter o-rings near the buttock-end and also that area (the inside) needs to be machined to fit a valve check. If possible the inside of the valve should be bored too for extra valve volume and the other valve half that connect to it too (for better flow). A custom valve stem will be needed too (sniper's would be good if it can hold 2000+ psi without colapsing). Also the O.D. of the hole valve must be reduced to fit into a 2260 tube if it happens to be bigger, 3 retention screw holes will be needed also on the valve (the exhaust valve half part). That pretty sums it up on what I need!


Send me two valves and I could do one up for you.

Walter...

_________________
Image
Walter


Top
 Profile  
 
PostPosted: Sat Aug 29, 2009 10:07 pm 
Offline
User avatar

Joined: Sun Jun 11, 2006 8:43 pm
Posts: 1762
Location: Montreal, Quebec.
Voltar1 wrote:
Kinetic_Genius wrote:
into a pumper valve.. It will need two slots milled for outter o-rings near the buttock-end and also that area (the inside) needs to be machined to fit a valve check. If possible the inside of the valve should be bored too for extra valve volume and the other valve half that connect to it too (for better flow). A custom valve stem will be needed too (sniper's would be good if it can hold 2000+ psi without colapsing). Also the O.D. of the hole valve must be reduced to fit into a 2260 tube if it happens to be bigger, 3 retention screw holes will be needed also on the valve (the exhaust valve half part). That pretty sums it up on what I need!


Send me two valves and I could do one up for you.

Walter...


I'm am gonna check with sniper first to see if he has any and ask him for dimentions if possible.

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO