QB 79 Tank drop block --->2240

View unanswered posts | View active topics

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

r3mot3control

Post subject: QB 79 Tank drop block --->2240

Posted: Thu Feb 09, 2012 2:53 am

Joined: Fri Mar 13, 2009 10:14 pm
Posts: 1219
Location: Prince George BC

http://www.archerairguns.com/Archer-Airguns-Paintball-Tank-Adapter-for-QB79-p/qb79tankadapter.htm

I want the Co2 tank to run lengthwise beneath the barrel, this "tank drop box" is what I need isn't it? Do these things fit right into the 2240? I wanted to try a --Visible Impact 9oz Co2 tank-- as my power source. Is it as straight forward as that? I would rather not have the set up where the tank is vertical as it just looks silly to me. I wouldn't mind it out the back where it becomes the stock... last resort though, i guess.

Just in case I get, "why did you make a new thread" ...because it's a brand new topic, no HiPac here.

_________________
When ridicule and disinformation are government funded enforcers of a narrative, it is prudent to exprapolate the trajectory of that narrative. Then prepare accordingly, because history shows that most people will be enforcing it.

Top

2240mod

Post subject: Re: QB 79 Tank drop block --->2240

Posted: Thu Feb 09, 2012 7:45 am

Joined: Fri Jan 08, 2010 6:58 am
Posts: 887

Take a look at JDSairman Bulk fill PaintBall adapter. Specially made to fit 2240's and if need information, you can give him a call in Florida. Cost is us$ 59.00. He does ship to Canada by USPS(not UPSor FedEx).
http://www.jdsairman.com/MiscProducts.html

Home Page...
http://www.jdsairman.com/homepage.html
New Product...
http://www.jdsairman.com/newproducts.html

_________________
President and CEO of Procrastinator Unlimited.

Arsenal..
Kraft Marshmallow Pump and Shoot Rifle.
GoodYear Gatling Gun rubber-band shooter.
PEI Potato PCP Rifle.

Glass ..12" Dobsonian Reflector.
Shooting for the Stars.

Top

Gippeto

Post subject: Re: QB 79 Tank drop block --->2240

Posted: Thu Feb 09, 2012 9:35 am

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 3009
Location: Canada

Sure looks like this one...with a couple extra holes drilled and tapped. :wink:

http://www.archerairguns.com/QB79-Tank- ... 9tckit.htm

Top

rsterne

Post subject: Re: QB 79 Tank drop block --->2240

Posted: Thu Feb 09, 2012 12:15 pm

Joined: Sat Nov 03, 2007 4:19 pm
Posts: 9518
Location: Coalmont BC

From what I can see on the website, the JDS Airman tank block is the QB block with a couple of extra holes drilled and tapped in it for safety.... This is CRITICAL if you aren't running a 1.8K burst disc in the HPA system or filling with a hand pump.... The stock QB block has been know to blow off the end of a gun when a regulator failed and put 2600 psi into a QB tube....

Either block will fit a 13 CI HPA tank as they are under 2.000" diameter.... However, most 9 oz. CO2 tanks are about 2.06" OD and interfere with the barrel on either a QB or a 22XX installation.... Archer makes a breech shim for the QBs to resolve that problem....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal; Too many! Springers, Pumpers, CO2, but I love my PCPs and developing them!
Proud Member of the 2000+fps Club!

Top

Page 1 of 1

[ 4 posts ]

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum