powermaster 66 gold medalist repair

View unanswered posts | View active topics

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

kojack

Post subject: powermaster 66 gold medalist repair

Posted: Mon Dec 02, 2013 11:52 am

Joined: Fri Nov 29, 2013 8:40 am
Posts: 9
Location: GFW, Newfoundland

I have a powermaster 66 gold medalist and it does not take on any air. any ideas what is wrong ? Also, any modifications I could do while im in there?

Top

Big Bore Bart

Post subject: Re: powermaster 66 gold medalist repair

Posted: Mon Dec 02, 2013 8:14 pm

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA

Open the bolt and pump while listening at the breech. If you hear the air coming out there, it is the valve stem, if not it's time for a pump cup. As far as mods, there is always the flat-top piston and valve, port matching (no larger than ~.140"), lighter valve spring, trigger work........ How far do you want to go?

Top

kojack

Post subject: Re: powermaster 66 gold medalist repair

Posted: Tue Dec 03, 2013 12:38 pm

Joined: Fri Nov 29, 2013 8:40 am
Posts: 9
Location: GFW, Newfoundland

I want to take it far. as a project. there is no air leaking, there is no air going into the gun. At all. I am a tinkerer, I love moding stuff. So instructions on all these mods would be awesome! Is there a site, or place where I can get this information to do? :drinkers:

Top

Big Bore Bart

Post subject: Re: powermaster 66 gold medalist repair

Posted: Tue Dec 03, 2013 11:40 pm

Joined: Wed Mar 27, 2013 9:51 pm
Posts: 89
Location: California USA

You're on one. Search for flat-top valve posts. Just about any mod for the Crosman pumpers can be done to your 66.

A softer spring in the valve allows for both more air in and more pumps before air retention.

Top

Hacked2Pieces

Post subject: Re: powermaster 66 gold medalist repair

Posted: Wed Dec 04, 2013 9:26 am

Joined: Fri Nov 02, 2012 8:41 pm
Posts: 1253
Location: Brant County

Big Bore Bart wrote:

You're on one. Search for flat-top valve posts. Just about any mod for the Crosman pumpers can be done to your 66.

A softer spring in the valve allows for both more air in and more pumps before air retention.

X2 just about everything that can be done to the 13XX,760's... pumpers can be done to the 66

its the same valve and piston setup! just search and yee shall find lol

_________________
It's better to die quick fighting on your feet, then to live forever begging on your knees - Lamb Of God

Top

Page 1 of 1

[ 5 posts ]

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum