rsterne wrote:
Quote:
I'm using a 50 watt halogen hung 4' over the chrony
A single light source can give errors and varying velocity readings, depending on how far above the sensors you shoot.... The higher you shoot, the faster the velocity will be, and the closer to the sensors the lower.... That could easily be your wide ES.... You need two lights, one above each sensor, if you aren't shooting outside....
Bob
Thanks Bob. Im gonna pick up 2 led pucks to mount above the sensors.
Lots more fooling around today. I think I hathe best I
can do.
I think that is more efficient than mine.
Later on if you're into the hammer area remove oil form hammer bushes and the hammer rail ,then polish the rail with toothpaste or jewellers rouge and run dry..kelly
1. 892.3
2. 898
3. 899.3
4. 890.4
5. 891.1
6. 890.7
7. 897.1
8. 892.1
9. 895.7
10. 897.2
11. 889.2
12. 892.3
13. 893.0
14. 893.8
15. 893.1
16. 890.3
17. 891.7
18. 890.5
19. 889.6
20. 892.8
21. 894.6
22. 896.6
23. 893.0
24. 896.3
25. 894.6
26. 888.7
27. 892.7
28. 890.3
29. 887.2
30. 893.0
31. 898.1
32. 893.2
33. 892.2
34. 892.3
35. 892.1
36. 890.2
37. 883.3
38. 891.1
39. 885.3
40. 890.3
41. 886.1
42. 887.7
43. 891.5
44. 893.7
45. 890.5
46. 887.5
47. 886.4
48. 885.9
49. 888.3
50. 884.1