Canadian Airgun Forum

Hello,
I have Umarex Beretta M92 A1, shoot about 6-7 CO2s within 5 months. I notice 1 CO2 is enough for 5 mags.
Normally after 4 mags I finish the CO2 cartridge in full auto mode. Yesterday during full auto mode it was jammed.
After quick look and field dissemble i noticed one small spring on the table. It came from plastic piston see image bellow,
I also find second similar spring there and was able to take it out from the bottom of the piston.
I don't see any broken parts, and wont to return back the springs. In order to do so I believe the piston should be removed,
and the problem is that i cannot find a way how to do that. There is small screw I removed it. All piston's assemble is moving a bit but i think the safety lever is not let the assembly to go out. see pictures.
Please advise, link to the videos and documentation will help me.
thank you.
P.S.
I think my warranty is expired since as it written it is only 90 days. I bought it in May 2016 in Cabelas.

Not familiar with the gun, but maybe this might help; 92FS Exploded View Diagram
Good Luck!

_________________
Don't Be Sexist - Broads Hate That.

This should look more like it...

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.

I was not able to disassemble it , but was able to put back the springs by squeezing them.
Although i'm not happy how they located there and they produces unhealthy noise, the pistol is working so far.
anyway thank you guys for replays.