Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 18, 2024 6:56 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Umarex H'n'k USP
PostPosted: Mon Aug 27, 2018 6:11 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
Where was all that time :?: , never saw this one go by. I must have been abducted by Alien... :mrgreen:

When I was looking on internet every time I saw it, I was thinking of my firt USP from Umarex, it was DA only and not blowback :cry: . Then last week while looking at AirGunSources site I saw ''Blowback'' :shock: . Had to look 3 times to be sure :hsmash . Oredered it on wenesdday night, received it today (monday) at noon...

And searching for a review, couldn't find one so...

Unboxing...

1- In a plastic clam shell, Umarex style, gun, mag and the allen key + usual book's.
2- Look's awesome, overall finish is great looking.
3- Body is platic (polymer ?) with a very very small seem in the center very goog/nice finish.
4- Slide is metal, very heavy. Top (Umarex) quality.
5- Grip is good for my hand's (medium size) every thing is at the right place. Mag release is ambi, not the safety or slide release.
6- Safety is also a decoaker.
7- Trigger guard is long, easier for shooting with gloves.
8- Trigger is SA/DA, in DA as usual a bit long and a bit hard, in SA it is short and light, heavier then a 1911.
9- Working slide catch.
10- Full size drop out mag, 16 shot.
11- Working hammer.
12- Writings on the slide are not to much intrusive.
13- Weight is 2.4 pound, it's a heavy gun. If you don't like heavy gun, don't buy this gun.
14- On the bottom there is a rail, I'd call it a weaver but not a picattini.

Picture, if Ihave the time...

Shooting...

thursday most probably.

SilentMan

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.


Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Wed Aug 29, 2018 10:07 am 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
Got couple pictures

SilentMan...


Attachments:
File comment: In the instruction they say loading by the top, where the pencil is, the groove enlarge enough to drop the BB's from the bottom, wich I prefer/easier.
IMG_8042.JPG
IMG_8042.JPG [ 81.28 KiB | Viewed 4814 times ]
File comment: Right side, notice the marking
IMG_8029.JPG
IMG_8029.JPG [ 86.74 KiB | Viewed 4814 times ]
File comment: Left side, beatiful isn't it...
IMG_8016.JPG
IMG_8016.JPG [ 82.29 KiB | Viewed 4814 times ]

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.
Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Wed Aug 29, 2018 10:15 am 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
It dissassemble the same way as a 1911

SilentMan... 8)


Attachments:
File comment: As for the rail as I did mention. a picattini accessorie will not fit unless you can remove the guide pin. There is no slot on the bottom to accomodate it. On the picture from left M1911TAC, M'n'P40, G17 and USP (no slot)...
IMG_8006.JPG
IMG_8006.JPG [ 87.91 KiB | Viewed 4814 times ]
File comment: Align the notch and pull the pin...
IMG_8039.JPG
IMG_8039.JPG [ 85.9 KiB | Viewed 4814 times ]
File comment: The same as a 1911, align the notch, pull the pin out and slide forward
IMG_8040.JPG
IMG_8040.JPG [ 91.19 KiB | Viewed 4814 times ]

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.
Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Wed Aug 29, 2018 11:34 am 
Offline
User avatar

Joined: Sun Mar 01, 2015 9:12 am
Posts: 1038
Location: Hamilton
Nice One!
Too bad not Pellet.
On My 'List' anyhow!

_________________
A Whole Bunch of Handguns!
C02, SPRINGER, Pneumatic, Most new, some Vintage, a few Airsoft?
More Vintage!


Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Wed Aug 29, 2018 12:29 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
silentman wrote:
It dissassemble the same way as a 1911

SilentMan... 8)


HK USP's did not have picattiny rails. They had their own propriety mount. Gotta buy accessories meant for USP.


Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Wed Aug 29, 2018 2:34 pm 
Offline
Supporting Members
User avatar

Joined: Mon Jan 01, 2007 10:54 pm
Posts: 6274
Location: Saint John NB
Well damn......I like that. Thanks for the write up. :mrgreen:

_________________
Jonathan

Moderator


Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Thu Aug 30, 2018 7:02 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
leadslinger wrote:
silentman wrote:
It dissassemble the same way as a 1911

SilentMan... 8)


HK USP's did not have picattiny rails. They had their own propriety mount. Gotta buy accessories meant for USP.



Your right it's hard to find accessories that will fit perfectly. But width is the same as a picatinny... so it's not impossible to fit something...

SilentMan...


Attachments:
File comment: It can be done, I prefer it naked, no accessories...
IMG_8051.JPG
IMG_8051.JPG [ 83.69 KiB | Viewed 4751 times ]

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.
Top
 Profile  
 
 Post subject: Re: Umarex H'n'k USP
PostPosted: Thu Aug 30, 2018 7:28 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
Shooting the gun

So went shooting the 1911, Dragon and the USP this morning. At the begining it was cold, Thermometer of my car saying 11c. So, I let the car running with heater blasting to keep CO2 warm.

Inserted the CO2 and tighted it, no leak, good start, loaded the BB’s, rack the slide, had to push it closed, then I got very worried, slide did not cycle correctly, staying half closed or double feeding, same problem as my M’n’P 40. :evil:

Ok it’s a new gun and it felt dry (no lube) on receiving it so I field stripped it and lube it,before going shooting. The only thing I did not touch was the mag, so I had nothing to loose, took pelgun oil and pourred couple of drop on the first BB and left it standing for the oil to go down... Half an hour later put it back in the gun and it work correctly, slide cycling ok :supz: , I’m so happy :partyman: . Cause I love that gun... look/finish.

1- Noise is equal to the 1911.
2- BlowBack kick is about the same as my 1911.
3- FPS is announced at 325fps, 6 shot average is at 329.2fps.
4- Pulling the follower is a pain because the thing to pull it is so small, I used a small holder I made for the GSG92, worked fine.
5- Grip, I had a bit of adjust, because my left thumb was in the way of my trigger finger.
6- Accuracy, grip probably causing me to shoot left and low. First 6 shot where left and low outside the ring of the target, nest 6 shot left (less) again but hight was almost on the spot.
7- Shot count, you will get 3 mag (about 45 shot’s) a 4th mag is possible but will probably fail to finish.

Overall note, I give that gun 8/10, it lost point’s because of follower hard to pull/hold, grip and the slide not locking back all the time after last shot...

Got question, just ask, I will answer if I know it... 8)

SilentMan.

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO