wesb2007 wrote:
The trigger is adjustable without taking anything apart. Just need a small hex key to slide into the hole in the trigger guard down to the adjustment screw on the trigger. Tighten in to make the trigger lighter. Itll go all the way to not being able to cock so watch out you don't get too hair of a trigger, =).
Sent from my EML-L09 using Tapatalk
That screw adjusts the first stage travel, I believe the weight (sear engagement?) is a smaller hex screw behind the trigger once you remove the grip panels.
Ran a string from 180bar-90bar (fell off reg at 100 bar). Regulator definitely creeps immediately.
Aside from the creep, it also behaves weird... There's a steady decline in fps from 180bar down to 100 bar (From 460's down to 420's). You would expect this in a regulated airgun if you had too much hammer spring, but I don't. There is a spike below the regulator set point (along with a noticeably louder shot).
Once I get the Huma reg, I should get around 90 regulated shots in .22, way more than I expected given the short barrel.
Login
Register
FAQ
Search
News 
Site map 
SitemapIndex 
RSS Feed 
