Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Oct 17, 2018 6:08 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Oct 12, 2018 1:11 pm 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 131
well i really do think crosman's quality control has gone down, and this just proves it. After my last experience with a 1322.... and now that i got a new one it won't even hold air. great. thought it may be crud in the valve stem, there was some plastic built up on the metal stem, but that did nothing. it leaks out the barrel.


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 1:28 pm 
Online
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 1204
Location: GTA, ON
Thanks it's a new one and you can just get a replacement directly from where you bought it, right?

Sent from my LG cellphone

_________________
Izzy 46M
2240+14" barrel/Williams peep sight - Twilight 0.05
Daisy 953/3-9x40 AO Hawke Scope
P3+2x20 Kit Scope
HW40+Extender
HW45+Grip panels from Russia
P1322 with walnut forearm


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 1:39 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 1915
Location: Somewheres near the Atlantic
I wasn't a fan of Crosman QC in the last few guns I owned.

You should have just returned it. Now they might not take it back because you took it apart. There been a few guns I bought that had issues rather then returning. I took it apart to figure out. And I was told I'm SOL.


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 1:44 pm 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 131
YepYep wrote:
Thanks it's a new one and you can just get a replacement directly from where you bought it, right?

Sent from my LG cellphone


yeeah but id rather not have to wait, but it looks like i may have to.


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 1:45 pm 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 131
leadslinger wrote:
I wasn't a fan of Crosman QC in the last few guns I owned.

You should have just returned it. Now they might not take it back because you took it apart. There been a few guns I bought that had issues rather then returning. I took it apart to figure out. And I was told I'm SOL.


ironically you can't legaly do that. people are allowed to take apart there own property, and still return it, as long as they didn't break it. alot of places don't follow that law, but what is one person going to do? its not like they have the money to sue them.


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 1:53 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 1915
Location: Somewheres near the Atlantic
Ausername wrote:
leadslinger wrote:
I wasn't a fan of Crosman QC in the last few guns I owned.

You should have just returned it. Now they might not take it back because you took it apart. There been a few guns I bought that had issues rather then returning. I took it apart to figure out. And I was told I'm SOL.


ironically you can't legaly do that. people are allowed to take apart there own property, and still return it, as long as they didn't break it. alot of places don't follow that law, but what is one person going to do? its not like they have the money to sue them.


Crosman warranty says otherwise.

https://www.crosman.com/general/warranty-information

Quote:
ANY DISASSEMBLY OR MODIFICATION NOT PERFORMED BY A CROSMAN AUTHORIZED SERVICE CENTER WILL VOID YOUR WARRANTY.

THIS LIMITED WARRANTY DOES NOT INCLUDE CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY OR ANY OTHER EXPENSE. CROSMAN DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON IMPLIED WARRANTIES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT ANY PROVISION OF THIS WARRANTY IS PROHIBITED BY FEDERAL, STATE OR MUNICIPAL LAW, IT SHALL NOT BE APPLICABLE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY.


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 2:25 pm 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 131
leadslinger wrote:
Ausername wrote:
leadslinger wrote:
I wasn't a fan of Crosman QC in the last few guns I owned.

You should have just returned it. Now they might not take it back because you took it apart. There been a few guns I bought that had issues rather then returning. I took it apart to figure out. And I was told I'm SOL.


ironically you can't legaly do that. people are allowed to take apart there own property, and still return it, as long as they didn't break it. alot of places don't follow that law, but what is one person going to do? its not like they have the money to sue them.


Crosman warranty says otherwise.

https://www.crosman.com/general/warranty-information

Quote:
ANY DISASSEMBLY OR MODIFICATION NOT PERFORMED BY A CROSMAN AUTHORIZED SERVICE CENTER WILL VOID YOUR WARRANTY.

THIS LIMITED WARRANTY DOES NOT INCLUDE CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY OR ANY OTHER EXPENSE. CROSMAN DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON IMPLIED WARRANTIES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT ANY PROVISION OF THIS WARRANTY IS PROHIBITED BY FEDERAL, STATE OR MUNICIPAL LAW, IT SHALL NOT BE APPLICABLE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY.


never said it was legal for them to say that. https://en.wikipedia.org/wiki/Consumer_Rights_Act_2015


Top
 Profile  
 
PostPosted: Fri Oct 12, 2018 3:35 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 1915
Location: Somewheres near the Atlantic
Ausername wrote:
never said it was legal for them to say that. https://en.wikipedia.org/wiki/Consumer_Rights_Act_2015

FYI that is for the UK, NOT Canada.

You should be responsible for the repair cost. Because you voided the warranty. And it's wrong and dishonest if you think the business should replace it. You have no proof it wasn't working before you took it apart, or the plastic stuff on the valve. This is why we got airgun/gun smiths. That their job.

I know it sucks. But there is consequences for every action.


Top
 Profile  
 
PostPosted: Sat Oct 13, 2018 12:04 am 
Online
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 1758
Location: Caronport, Saskatchewan
Good thing about the 1322 is it's easy to work on, parts are easy to get and they are reasonably priced. Sending the gun back to crosman probably would cost half the price of the gun, though they may even pay your shipping, they have a pretty good warranty center in Canada with Gravel agency.
Anyway they are fun to take apart =)

Sent from my LG-M154 using Tapatalk


Top
 Profile  
 
PostPosted: Sat Oct 13, 2018 8:30 am 
Offline

Joined: Thu Apr 27, 2017 4:38 pm
Posts: 131
leadslinger wrote:
I wasn't a fan of Crosman QC in the last few guns I owned.

You should have just returned it. Now they might not take it back because you took it apart. There been a few guns I bought that had issues rather then returning. I took it apart to figure out. And I was told I'm SOL.


also like how they put oil behind my rear sight but none on the piston...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO