Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Mar 28, 2024 11:34 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Thu Nov 29, 2018 8:27 pm 
Offline
User avatar

Joined: Thu May 04, 2017 6:41 pm
Posts: 136
Location: Vancouver BC
I haven't tried duct seal because it look to time consuming to pickout the used pellets. Collection 100% of my pellets is important to me for my basement 12m range and I really don't want to throw lead into the trash.

A rubber mulch trap, to me, seems the easiest way to trap AND collect pellets. Here's a little photo essay of changing out a shot up cardboard box for a fresh one to demonstrate how easy and quick it is to collect your pellets. The rubber mulch is reused and the lead put back in the pellet tins.

I tape fresh 8x11 targets on top of old ones until the box is to shot shot up.
Since impact points are the same for all the targets I flip the box over every four paper targets to shift the rubber mulch inside.
This prevents penetration.
Attachment:
IMG_1121.jpg
IMG_1121.jpg [ 304.24 KiB | Viewed 2412 times ]



I dump the contents of the old trap into a large tray but you could just as easy dump it directly into your new box.
Just give it a shake now and again and the pellets with move to the bottom.
Attachment:
IMG_1123.jpg
IMG_1123.jpg [ 572.66 KiB | Viewed 2412 times ]



I push the rubber mulch into a pile.
The lead falls to the bottom and I scoop up handfuls of the rubber mulch from the top of the pile and put it into the new cardboard box.
My first trap was 10" deep and forty pounds of rubber mulch. HaHa, SO heavy and unnecessary.
Now I use boxes that can fit an 8x10 peice of paper and are 4-6" deep.
The box does not need to be deeper than that to stop a 700fps .22 pellet. I also nice that the trap is heavy enough that it does not move at all on impact.
Attachment:
IMG_1126.jpg
IMG_1126.jpg [ 445.83 KiB | Viewed 2412 times ]



It's really important to pack the box tight with mulch. Add packing tape the the corners to reinforce the box so you can really pack it solid.

_________________
Good, Cheap, Fast; pick two.


Top
 Profile  
 
PostPosted: Thu Nov 29, 2018 8:31 pm 
Offline
User avatar

Joined: Thu May 04, 2017 6:41 pm
Posts: 136
Location: Vancouver BC
Here's whats left in the tray. 2000 pellets. Yes, I've been having fun.

Attachment:
IMG_1156.jpg
IMG_1156.jpg [ 409.39 KiB | Viewed 2411 times ]




Attachment:
IMG_1158.jpg
IMG_1158.jpg [ 395.96 KiB | Viewed 2411 times ]




And here's the fresh trap. I put a line of tape at the bottom to catch the paper bits and dust.
Stick on a target sheet, shoot, repeat.
Attachment:
IMG_1135.jpg
IMG_1135.jpg [ 371.94 KiB | Viewed 2411 times ]


I love how rubber mulch traps are so quick, low tech, quiet and 100% lead collection.

_________________
Good, Cheap, Fast; pick two.


Top
 Profile  
 
PostPosted: Thu Nov 29, 2018 11:26 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
Looks nice! Actually after peeling out 3 bottles of lead with a sticker, total about 15lbs, I look a bit tired to do so again, and looks this is something interesting ~ especially in the easy collection process...

Just one quick question, where to find the rubber mulch?? And is that comes in some size I need to note about?

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 1:09 am 
Offline
User avatar

Joined: Thu May 04, 2017 6:41 pm
Posts: 136
Location: Vancouver BC
You can find rubber mulch at any garden or big box hardware store. About $10 for 20lbs bag.
They typically come wet from being in the outdoor section of the store. I spread a new bag out on a tarp to dry it out before stuffing it in a box.
Even though it is chopped up tires it's clean to work with. Does not make your hands dirty.

I wonder how many shooters using duct seal just throw it in the trash?

_________________
Good, Cheap, Fast; pick two.


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 1:38 am 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
I use duct seal, but never put it into trash.

Actually sitting cozy and with the duct seal trap on the lap, use a stick to pick up the pellet is a way to get you relax ~ :D

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 6:54 am 
Offline
User avatar

Joined: Mon Mar 27, 2017 7:06 pm
Posts: 1167
Location: Meaford, Ont.
Pushtone wrote:
You can find rubber mulch at any garden or big box hardware store. About $10 for 20lbs bag.
They typically come wet from being in the outdoor section of the store. I spread a new bag out on a tarp to dry it out before stuffing it in a box.
Even though it is chopped up tires it's clean to work with. Does not make your hands dirty.

I wonder how many shooters using duct seal just throw it in the trash?


I shoot about 500 pellets a week and have shot my big duct seal trap for two years now and have never changed it. I use a paint scrapper and scrap the top layer to get the pellets out. May pull some with needle nose plyers. Any big divots in the duct seal I just cut up pieces of new duct seal to fill the divots. Shoot pellets onto pellets in duct seal they just stick to the other pellets or they stop and fall to the bottom of trap. The plastic election signs sit in front of my duct seal and it traps lose pellet in behind as well. Plus it holds the duct seal in place as mine as it is 20 X 14 for extra room for computer printed targets. Then I glue targets onto cardboard that sit at front of trap

I do wonder what the Recycle truck driver thinks seeing all the shotup targets in my recycle weekly. LOL

CHEERS!


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 7:38 am 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
I found some boxes in the good size ( basically about 5 to 6 inches deep), and will bring home a bag if the rubber mulch home today to try this out ~

And it looks the timing for collecting shot pellets should be the day I found the box just need to be replace due to the face I shoot on get 'wearing' put?!

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 9:03 am 
Offline

Joined: Mon Aug 15, 2016 11:00 pm
Posts: 784
This is a good idea, always find it nice to find idea about collecting used pellet easier, how do you find the used pellet form? is it totally get squish when it hits the rubber? would you be able to post some close up picture of the used pellets.


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 9:43 am 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
Yes! The best part of this is when you collect the pellets ( also the time you need a new box), just shake them to the bottom of the box and transfer the rubber mulch to the new box and all you have remained in the old box are the used pellets ~

The worst part is the same ~ you nees to keep on looking for new boxes ~ [emoji38] and the new box had better the same size that can hold all rubber pieces from the old box perfectly ~

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 11:08 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
I like duct seal because you don't need much for it to stop a pellet. But it's annoying to clean the pellets out.

I liked the concept of rubber mulch. The shock wave would mix it up. So shouldn't have any dead areas. But you need 3-4x more to stop a pellet, and stuck with a very heavy box. Plus the constant repairs to keep the mulch in, was annoying.

I used a foam rubber mat. Kinda like self healing. But after a 100 pellets or so. The mulch would start falling out.


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 11:40 am 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
Yeah ~ that's what I need to try and wait and see, how long the box can survive, how easy to move the rubber mulch around from this box to the other...

Hopefully due to the material and the weight, the rubber mulch won't 'stick' around due to static like the light weight foams plastic... That's super annoying ~

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 11:51 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
YepYep wrote:
Yeah ~ that's what I need to try and wait and see, how long the box can survive, how easy to move the rubber mulch around from this box to the other...

Hopefully due to the material and the weight, the rubber mulch won't 'stick' around due to static like the light weight foams plastic... That's super annoying ~

Sent from my LG cellphone


I wonder if you make a wooden box. Put a hole in one of the corner, with a trap door. That you could shake it, pellets would collect in an area and open the door to pour out? Gotta be a mesh or material that be able to contain the mulch?

But the mulch will not static stick. Since it's rubber. Normally old tires or shoes.


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 12:27 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
Isn't that the wooden box would be too heavy as the rubber is heavy already... Will check it out and see how to improve it in the following versions~

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 12:41 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
YepYep wrote:
Isn't that the wooden box would be too heavy as the rubber is heavy already... Will check it out and see how to improve it in the following versions~

Sent from my LG cellphone


Kinda rather have something that will hold the weight. Then a cardboard box that may not. And forced to reinforce it with tape. last thing you want is the contents spilling out when you lift trying to empty.

The box I made at he time. Was just out of 1/2" pine panels. Couldn't imagine it being more then 2lbs w/o the mulch. And if weight an issue, then don't use mulch. Stick with duct seal.

But a bag of rubber mulch is like 22lbs. And I used 3/4 of a bag in my trap. So it's going to be heavy anyways.

Image

Filled and put those foam over, couple strips of tape. But then I put 1x1 across to staple cardboard to place my targets on.

Image


Top
 Profile  
 
PostPosted: Fri Nov 30, 2018 2:42 pm 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5125
Location: GTA, ON
Just checked the local store for the rubber mulch. I think I have to stick with the duct seal as I don't think my wife will allow me to bring this type of mess into the house...

It looks difficult to handle and you must be prepared to get dirty while working with it...

From a broken bag, I checked a bit on the rubber pieces, and get the color transferred to my hand... And I don't want to do extra cleaning jobs on the floors, clothes, myself after handle this thing.

Maybe the weight would be an issue too, with a stronger box ( like wood), the whole thing would probably weight about 20lbs (I don't plan on a big box) and which my duct seal one is still less than 10lbs ( although it will look heavier as the box is smaller ( just about 2 inches deep, no need to be 5 or 6 inches)Image

Sent from my LG cellphone

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO