Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Mar 28, 2024 11:56 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Jan 18, 2019 12:42 pm 
Offline

Joined: Mon Aug 24, 2015 4:56 pm
Posts: 489
Location: SW Ontario
Does anyone know how to remove the rear plate that covers the access to the hammer adjustment screw. On the HW100 it's easy enough by just removing two screws. On the HW110 the plate is part of one larger piece that also includes the trigger guard. I removed the one screw holding this piece in place but it won't come off.

Thanks


Top
 Profile  
 
PostPosted: Sun Jan 20, 2019 8:54 am 
Offline

Joined: Mon Aug 24, 2015 4:56 pm
Posts: 489
Location: SW Ontario
For the record in case someone searches for a way to adjust the hammer force on this gun I found a way.
To remove the rear plate assembly you need to remove the screw in front of the trigger guard. Next remove the drift pin shown in the image.
The plate and trigger guard will come right off as one piece. Insert a 4mm Allan wrench in the access hole shown in the image and fit it into the hammer spring adjusting screw.
Clockwise lowers the power. The entire range is limited to 5 turns I believe. On mine it was already as low as it could go so I'll have to turn down the regulator to get it to shoot at 20fpe for FT.
Btw for our UK and other members in countries where there are anti tamper laws there is a plug in the screw that prevents you from inserting a wrench.

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO