Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sat Jul 20, 2019 12:43 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Mon May 06, 2019 5:48 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Hey i need help reassembling a crosman raven trigger pack safty button style. If any one has a diagram pictures or instructions how it would help thanks


Top
 Profile  
 
PostPosted: Mon May 06, 2019 7:07 pm 
Offline
User avatar

Joined: Thu May 07, 2015 8:30 pm
Posts: 1157
Location: Eastern Townships, P.Q.
You can see and download the Raven's EVP here: https://support.crosman.com/hc/en-us/ar ... 8-Present-

However it's not of much help if you took apart the trigger group itself. Maybe you could get something out of this: https://www.gatewaytoairguns.org/GTA/in ... ic=10450.0

_________________
Too many projects,
Not enough time


Top
 Profile  
 
PostPosted: Mon May 06, 2019 7:29 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Hey thanks for the help but still unsure how to reassemble it


Top
 Profile  
 
PostPosted: Mon May 06, 2019 7:35 pm 
Offline

Joined: Sat Jan 25, 2014 9:16 pm
Posts: 1233
Location: United States
Not many people have that kinda gun, but I'm bettin it's a very simple design so if all else fails you could post detailed pix and we could figure it out.

If/when you succeed maybe you could take some pix and add a few arrows and text to explain for the next guy. Do unto others and all that... Most people just get their cookie and don't worry about about others in the same boat. If can't edit the pix you can send them to me.


Top
 Profile  
 
PostPosted: Mon May 06, 2019 7:38 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Ok sounds good will have themnposted shortly appreciate the help


Top
 Profile  
 
PostPosted: Mon May 06, 2019 8:30 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Here they are first pictures my guess how it goes except the triggers extreamly stiff.and doesnt feel right 2nd picture is all the pieces and 3rd is how it was when i opened it...extreamly confusing how to put back together


Attachments:
IRS20190506_220653.jpg
IRS20190506_220653.jpg [ 117.06 KiB | Viewed 277 times ]
IRS20190506_220728.jpg
IRS20190506_220728.jpg [ 117.05 KiB | Viewed 277 times ]
IRS20190506_220202.jpg
IRS20190506_220202.jpg [ 66.05 KiB | Viewed 277 times ]
Top
 Profile  
 
PostPosted: Mon May 06, 2019 9:20 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
And heres were im at with it


Attachments:
IRS20190506_221935.jpg
IRS20190506_221935.jpg [ 114.82 KiB | Viewed 275 times ]
Top
 Profile  
 
PostPosted: Mon May 06, 2019 9:35 pm 
Offline
User avatar

Joined: Thu May 07, 2015 8:30 pm
Posts: 1157
Location: Eastern Townships, P.Q.
Here are some pics that could be of some help to you (I hope), thanks to bwana on the GTA:


Attachments:
IMG_2722.JPG
IMG_2722.JPG [ 30.31 KiB | Viewed 270 times ]
IMG_2720_01.JPG
IMG_2720_01.JPG [ 28.4 KiB | Viewed 270 times ]
IMG_2718_01.JPG
IMG_2718_01.JPG [ 25.14 KiB | Viewed 270 times ]

_________________
Too many projects,
Not enough time
Top
 Profile  
 
PostPosted: Mon May 06, 2019 9:44 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Wow thanks for the help will posr picture when i get it all assembled


Top
 Profile  
 
PostPosted: Tue May 07, 2019 12:12 am 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Nice custom crosman raven reassembled


Attachments:
IRS20190507_011156.jpg
IRS20190507_011156.jpg [ 132.87 KiB | Viewed 256 times ]
Top
 Profile  
 
PostPosted: Tue May 07, 2019 3:35 am 
Offline
User avatar

Joined: Thu May 07, 2015 8:30 pm
Posts: 1157
Location: Eastern Townships, P.Q.
Yeah, way to go!

_________________
Too many projects,
Not enough time


Top
 Profile  
 
PostPosted: Wed May 08, 2019 4:38 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
For some reason when i break the barrel after shooting probably 100 rounds i cant get tge spring to lock back (it wont cock) any ideas?


Top
 Profile  
 
PostPosted: Wed May 08, 2019 6:55 pm 
Offline

Joined: Sat Jan 25, 2014 9:16 pm
Posts: 1233
Location: United States
Is it cocking back all the way and the sear is just not catching it, or is not cocking quite all the way like something is blocking the last little bit? If it's working normally then the last little bit should cause the trigger blade of snap fwd a bit, or at least the sear just above it will with a sharp click. I'm assuming the trigger blade will as well since it appears the sear is what moves the trig blade fwd, but I can't say for sure unless I know what that looong leg of the trig blade is. Wth is that?
I'll assume the former, and if so then the sear is no doubt not working right. Duh, so I should say something is causing the issue, like if a spring were to pop off or break if could cause it. Or a spring not installed correctly which is a common prob w/ a variety of triggers peep mess with. A bit of debris, like a chunk of plastic broken off can cause issues too. Sometimes if can be stiction from a lack of lube and/or burrs on the parts. These are typically made of stamped steel parts so they will have an edge left over, the question is that edge being a problem. I sand all those edges round n smooth, mostly b/c it just bugs the hell outta me but it also eliminates any possible issues.
So are you sure the springs are all in the right spots? Sure or just pretty sure? Sometimes the leg of a spring needs to be placed in the correct spot or it'll cause some binding on the sear, so double check the springs all look right, meaning the parts can move how they move w/o a spring leg scraping it. It's normal for some scraping, just be sure the leg is in the ideal spot to minimize it. Burrs compound this scraping issue so one more reason to remove all of them.
I'm guessing it wouldn't take much stiction or a burr on the end of that loong leg to hold up the trigger, which would mean the sear cannot set and you'd have what you described.
A troubleshooting tip when the gun is assembled is to fully cock and hold the barrel there, then pull the trigger to see if that allows it to set. In your case, I'd also try pushing the trigger fwd. If it works you'll likely hear a click when the sears catch.
Other things that can cause it to hang up are screws that are too tight. Often plastic will flex under that screw(s) and pinch parts. Look on both sides of the housing for any scrape marks that suggest a part is hanging up, including wherever that long leg of the trigger is going.
When the trig is apart you can manually simulate the cocking and firing of the trigger. Apart meaning the side cover is off but all the parts are in, and I'm guessing you'll have to hold the one long leg of that one spring to simulate it's normal position. Then look for issues while cycling it.


Top
 Profile  
 
PostPosted: Wed May 08, 2019 7:16 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
Ya so it cocks back but its not catching like it wont lock nothings block or stoping the full movement it just wont catch on what ever it catchs wich i doubt was that long spring thay snapped?


Top
 Profile  
 
PostPosted: Wed May 08, 2019 7:34 pm 
Offline

Joined: Mon May 06, 2019 4:07 pm
Posts: 29
And it didnt snap in the trigger pack the piece that snaped was the piece coming out


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO