Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Mon Oct 21, 2019 2:59 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Fri Jul 05, 2019 7:03 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 453
My Artemis PP700 leaks air every shot where the transfer port meets the o ring on the barrel. Is there a way I can tighten the tranfer port block? Anyone else have this issue?

_________________
SKANZY


Last edited by Skanzy on Fri Jul 05, 2019 7:27 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Jul 05, 2019 7:12 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 453
it is hard to take a picture but if you hold the gun up to the light you can see the gap between the o-ring and transfer port block.


Attachments:
CIMG1210.JPG
CIMG1210.JPG [ 371.37 KiB | Viewed 465 times ]
CIMG1209.JPG
CIMG1209.JPG [ 208.65 KiB | Viewed 465 times ]
CIMG1207.JPG
CIMG1207.JPG [ 363.73 KiB | Viewed 465 times ]

_________________
SKANZY
Top
 Profile  
 
PostPosted: Fri Jul 05, 2019 10:20 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2875
Location: Caronport, Saskatchewan
Yep, when it's degassed, loosen the little side grub screw then if you have snap ring pliers that can fit when the pistol is cocked, turn the valve in clockwise a quarter turn or so, then retighten the grub screw and see if flip over port can still turn easily but is tighter to the seal.
If you can't get at the little holes in the valve back to turn, then you'll have to take off the grip then take of the hammer tension nut and tap out pin that holds the hammer.
Remove hammer then turn in valve as described earlier.

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
PostPosted: Sat Jul 06, 2019 1:13 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 453
wesb2007 wrote:
Yep, when it's degassed, loosen the little side grub screw then if you have snap ring pliers that can fit when the pistol is cocked, turn the valve in clockwise a quarter turn or so, then retighten the grub screw and see if flip over port can still turn easily but is tighter to the seal.
If you can't get at the little holes in the valve back to turn, then you'll have to take off the grip then take of the hammer tension nut and tap out pin that holds the hammer.
Remove hammer then turn in valve as described earlier.

Sent from my EML-L09 using Tapatalk


Thanks Wes!! That fixed it.

_________________
SKANZY


Top
 Profile  
 
PostPosted: Sat Jul 06, 2019 1:15 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2875
Location: Caronport, Saskatchewan
Oh good!

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO