Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Sun Sep 22, 2019 11:13 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Sep 07, 2019 2:11 pm 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
Non-PAL .22 Artemis PP800 PCP rifle review
With CR600W barrel and Altaros Regulator
Scope: Discovery VT2 3-12X40 AO
Pellet: JSB Straton Jumbo .22, 15.89g
Distance to target: 16 meters
Fill pressure: 200 Bar
Regulator setting: 75-80 Bar
Transfer port size: 2 mm

Results:
1. 5 shots per target, bulls eye diameter 10 mm. From top left to bottom right. Initial speed went from first shot at 500 ft/s down to last shot 460 ft/s.
2. All shots within the 10 mm bulls eye, except for a couple of flyers. 33 effective shots total before going off regulator with one hole accuracy. The only mod that I did was changing the original trigger with one from a BIC lighter. This allowed me to fine tune the trigger into a light and clean breaking two stage trigger, which definetely helped with the accuracy.

I would like to thank WesB for a great deal and excellent after sales service as always. This gun is fun to shoot, accurate, easy to tune and mod, excellent value. Highly recommended.
ImageImageImage

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 2:29 pm 
Offline

Joined: Mon Aug 15, 2016 11:00 pm
Posts: 277
nice shooting, always wonder about this setup


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 4:36 pm 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
pistolero wrote:
nice shooting, always wonder about this setup
Thanks, it took me a long time to review it. Got the gun more than 4 months ago from WesB. Finally got it tuned to my liking.

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 5:10 pm 
Offline

Joined: Mon Aug 15, 2016 11:00 pm
Posts: 277
My CR600W Sub 500 by Wes was very good at 40+, knocking down field target once zeroed in and lots of shot for the volume it has.


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 6:49 pm 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
pistolero wrote:
My CR600W Sub 500 by Wes was very good at 40+, knocking down field target once zeroed in and lots of shot for the volume it has.
My Non-PAL CR600W PCP with Altaros gets 75+ shots. Similar accuracy as the PP800. I love this gun. The other one with Lane gets even more shots than Altaros. I find the Lane likes higher set pressure than the Altaros.

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 6:57 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2783
Location: Caronport, Saskatchewan
Thanks for sharing, and great shooting!

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 9:23 pm 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
wesb2007 wrote:
Thanks for sharing, and great shooting!

Sent from my EML-L09 using Tapatalk
Thanks Wes for your great support! This is tuned based on your advise.

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 9:55 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 2783
Location: Caronport, Saskatchewan
Glad you got it shooting how you like it!

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 8:18 am 
Offline

Joined: Mon Jun 11, 2018 4:02 pm
Posts: 31
That's a fine looking rig Tom, and a great job of tuning it up to the edge, well done..!

That 13" scope doesn't look out of place whatsoever; are you using the medium or high rings that came with the scope..?

How long is that CR600w barrel..?

Shootin' Dimes...I Love it..!!!


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 9:19 am 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
Rupertt wrote:
That's a fine looking rig Tom, and a great job of tuning it up to the edge, well done..!

That 13" scope doesn't look out of place whatsoever; are you using the medium or high rings that came with the scope..?

How long is that CR600w barrel..?

Shootin' Dimes...I Love it..!!!
Hi Rupertt,

Thanks, these are the high two piece rings that came with the scope. The 600W barrel is about 19" long with the muzzle brake.

I intend to take it upto 25 meters at most. My aging eyes can not see any better even with 12X magnification.[emoji24] Besides, based on actual experiment, When sighted in at 16 m, my non-PAL gun's pellet should be flying flat between 15 to 25 m, within a 1" circle.

Thanks,

Tom

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 9:23 am 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
pistolero wrote:
My CR600W Sub 500 by Wes was very good at 40+, knocking down field target once zeroed in and lots of shot for the volume it has.
Sorry Pistolero, you meant 40+ yards? That is amazing shooting with a non-PAL gun.

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 10:33 am 
Offline

Joined: Mon Aug 15, 2016 11:00 pm
Posts: 277
Yes Tom, 40+ yards and it was surprisingly easy to acquire and shoot, I'm now wondering how this will perform on a .177


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 11:06 am 
Offline
User avatar

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 1921
Location: GTA, ON
Is the pellet dropped a lot at that distance? I was shooting the similar range in the train shed and found the pellets dropped about 2 inches but as the consistent of the HW30 / 35, the POI is still easy to be managed ~ so it seems the PP800 just works as good as the HWs~

And at that distance, with a scope @ 5x 6x power, I can aim objects about 2 inches big I think... I have aging eyes too... It's good that you can still shoot without seeing the blade sharp pictures~ [emoji38]

Sent from my S8 via Tapatalk

_________________
Izzy 46M
HW30 Stainless Steel + Discovery 40mm Scope
HW35 Walnut + Hawke 40mm Scope
2240+14" barrel/Williams peep sight
Camo Chaser long barrel rifle kit
P3+2x20 Kit Scope
HW40+Extender
HW45+Grip panels from Russia
P1322 with walnut forearm


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 11:48 am 
Offline
User avatar

Joined: Mon Jun 16, 2008 4:36 pm
Posts: 623
Location: nvvan
tom_ke888 wrote:
Rupertt wrote:
That's a fine looking rig Tom, and a great job of tuning it up to the edge, well done..!

That 13" scope doesn't look out of place whatsoever; are you using the medium or high rings that came with the scope..?

How long is that CR600w barrel..?

Shootin' Dimes...I Love it..!!!
Hi Rupertt,

Thanks, these are the high two piece rings that came with the scope. The 600W barrel is about 19" long with the muzzle brake.

I intend to take it upto 25 meters at most. My aging eyes can not see any better even with 12X magnification.[emoji24] Besides, based on actual experiment, When sighted in at 16 m, my non-PAL gun's pellet should be flying flat between 15 to 25 m, within a 1" circle.

Thanks,

Tom

通过我的 ALP-AL00 上的 Tapatalk发言


19 inches??
My cr600w was 21.6 inches.. I chopped off the part that is reduced diameter under the plastic sight which is about 2.25 inches long

_________________
Artemis Cr600w super tuned
1322 Field Target Mod
MINI UZI 4.5MM with laser two mags
Cp88 nickel comp. modded
Tanfoglio Limited Custom .177 BB
P226 x-five open comp tuned
Gsg-92 full race IPSC style mod


Top
 Profile  
 
PostPosted: Sun Sep 08, 2019 12:08 pm 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 104
Location: Guelph, Ontario
walther wrote:
tom_ke888 wrote:
Rupertt wrote:
That's a fine looking rig Tom, and a great job of tuning it up to the edge, well done..!

That 13" scope doesn't look out of place whatsoever; are you using the medium or high rings that came with the scope..?

How long is that CR600w barrel..?

Shootin' Dimes...I Love it..!!!
Hi Rupertt,

Thanks, these are the high two piece rings that came with the scope. The 600W barrel is about 19" long with the muzzle brake.

I intend to take it upto 25 meters at most. My aging eyes can not see any better even with 12X magnification.[emoji24] Besides, based on actual experiment, When sighted in at 16 m, my non-PAL gun's pellet should be flying flat between 15 to 25 m, within a 1" circle.

Thanks,

Tom

通过我的 ALP-AL00 上的 Tapatalk发言


19 inches??
My cr600w was 21.6 inches.. I chopped off the part that is reduced diameter under the plastic sight which is about 2.25 inches long
Hi Walther,

I think both of my 19" barrels are more accurate than the two 21.6" barrels. You did the right thing! [emoji12]

通过我的 ALP-AL00 上的 Tapatalk发言


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO