Diana Trailscout

View unanswered posts | View active topics

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 3 of 3

[ 32 posts ]

Go to page Previous 1, 2, 3

Print view

Previous topic | Next topic

Author

Message

wesb2007

Post subject: Re: Diana Trailscout

Posted: Sat Oct 12, 2019 7:37 pm

Joined: Sat Nov 05, 2016 10:52 am
Posts: 3967
Location: Caronport, Saskatchewan

Sure I'm away at the moment, but if you just drill the hole that is on the Trailscout trigger but not on the CR600W (looking at the pics I posted) then you'll have the one needed.

Sent from my EML-L09 using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/

Top

wesb2007

Post subject: Re: Diana Trailscout

Posted: Sat Oct 12, 2019 8:46 pm

Joined: Sat Nov 05, 2016 10:52 am
Posts: 3967
Location: Caronport, Saskatchewan

Just drill this hole and use the m3 tap and then use the little grub screw that in your cr600w trigger installing in the same direction as the trailscout screw. You'll thread it through the first layer of metal and then it'll be in air again before you thread through the second metal piece to come out to the area that engages the sear. In the pic below you can see which hole you drill and tap through both sections of metal trigger.

Sent from my EML-L09 using Tapatalk