Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Tue Nov 24, 2020 6:18 pm

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.








Post new topic Reply to topic  [ 141 posts ]  Go to page Previous  1 ... 6, 7, 8, 9, 10
Author Message
 Post subject: Re: Artemis PP750
PostPosted: Tue Nov 10, 2020 5:51 pm 
Offline

Joined: Tue Sep 22, 2009 9:57 pm
Posts: 203
Location: Aurora, ON, L4G7X4
I hate to wear glasses during day unless doing some computer screen or to see what my fingers doing.
For this same reason I prefer to have 2-3-4 mags preloaded instead of glasses ON - glasses OFF with single loading.


Top
 Profile  
 
PostPosted: Thu Nov 19, 2020 1:50 am 
Offline

Joined: Tue Sep 22, 2009 9:57 pm
Posts: 203
Location: Aurora, ON, L4G7X4
this red dot looks kind a tall for this PP750

Attachment:
20201118_201622.jpg
20201118_201622.jpg [ 78.23 KiB | Viewed 79 times ]


this crossbow scope lays around for a while

Attachment:
20201118_201917.jpg
20201118_201917.jpg [ 80.69 KiB | Viewed 79 times ]


and this 10-40x50 also just a dust collector for some time

Attachment:
20201118_202756.jpg
20201118_202756.jpg [ 75.14 KiB | Viewed 79 times ]


Shall I look for some low profile wide angle prism scope?


Top
 Profile  
 
 Post subject: Re: Artemis PP750
PostPosted: Thu Nov 19, 2020 4:31 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 7077
Location: P.G. B.C.
Still has to clear the magazine.

_________________
Best Wishes
Daryl


Top
 Profile  
 
 Post subject: Re: Artemis PP750
PostPosted: Thu Nov 19, 2020 11:14 pm 
Offline
User avatar

Joined: Sat Nov 05, 2016 10:52 am
Posts: 3533
Location: Caronport, Saskatchewan
I just got a 12 shot mag to test for the PP750. I'll get a bunch soon as well as Stormrider/Bandit/Chaser mags.
These would be a good candidate for 25 cal 8)

Sent from my SM-A515W using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/


Top
 Profile  
 
 Post subject: Re: Artemis PP750
PostPosted: Fri Nov 20, 2020 12:35 am 
Offline

Joined: Mon Jun 11, 2018 4:02 pm
Posts: 83
Location: Calgary Alberta
I am still looking for the right optical solution for the PP750.
I really want to try this 10x30 Prismatic Scope from MTC:

https://mtcoptics.com/swat-prismatic-10x30-atom/
wesb2007 wrote:
I just got a 12 shot mag to test for the PP750. I'll get a bunch soon as well as Stormrider/Bandit/Chaser mags.
These would be a good candidate for 25 cal 8)
While the .25 is my favourite hunting/pesting caliber, it's probably too much to hope for in the PP750.
I'd settle for a really nice .22 cal barrel that would run the full length of the shroud.

Anyone else find the cocking lever to be very hard/heavy to operate?
I'm afraid I'm going to bust the damned thing...

_________________
Crosman Mark II .177
Crosman 1077 .177
Crosman Phantom .22
Diana Chaser Carbine .22
Artemis M11 .25
Artemis PP800 Chaser Fusion .25
FX Dreamline Lite .25
Artemis PP750 .22


Top
 Profile  
 
 Post subject: Re: Artemis PP750
PostPosted: Fri Nov 20, 2020 2:13 am 
Offline

Joined: Tue Sep 22, 2009 9:57 pm
Posts: 203
Location: Aurora, ON, L4G7X4
Rupertt wrote:
I am still looking for the right optical solution for the PP750.
I really want to try this 10x30 Prismatic Scope from MTC:
....................
Anyone else find the cocking lever to be very hard/heavy to operate?
I'm afraid I'm going to bust the damned thing...


I have a Sig combo - red dot with a x6 magnifier, very comfortable in the field. I am not sure how would I like the fixed 10x, but again that power is relative to hunting more. The Bravo 5 (x5) is in my way expecting it hopefully before this years ends. I had a chance to compare red dots and prism sights and somehow I like the prism scope better vs red dot, maybe I keep both maybe not.

Back to PP750, nothing is wrong with the cocking lever, the internals are rubbing also the hammer spring is way to strong.
I just toke the cocking apart and polished the internals...way better but still room to improve. Also got some lighter springs (I did not wanted to clip that strong spring) from Mcmaster. The cocking lever is much easier to pull now but some light scraping metal on metal is still noticeable....
I saw some pictures over @ GTA that a fella did some undercut on the hammer head also on the bolt stud that catches against hammer sear ledge, to eliminate binding/tipping, because that is happening here as well. That will be my next to visit my buddy with a lathe.
Also with a lighter spring now most likely I will need some brass hammer weight.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 141 posts ]  Go to page Previous  1 ... 6, 7, 8, 9, 10

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO