Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Wed Apr 17, 2024 7:33 pm

View unanswered posts | View active topics


Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
Canadianguy
PostPosted: Tue Nov 10, 2020 9:14 am 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Hi......anyone know the size of the Crosman steel breech rear notch at the back top?


https://ibb.co/0BB9RtK

Thanks

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Tue Nov 10, 2020 9:42 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
topic73329.html
Top
 Profile  
 
Canadianguy
PostPosted: Tue Nov 10, 2020 9:58 am 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Thanks! I wanna get a notch put in the top, hoping possible.

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
gctkaz
PostPosted: Tue Nov 10, 2020 3:24 pm 
Offline
User avatar

Joined: Thu Oct 10, 2013 5:22 pm
Posts: 328
Location: Vancouver
I have the LPA MIM on my 1322 with steel breech and wanted one for my 1377 but couldn't find one in stock.

I found this 3D-printed item and installed it - works great and practically cost nothing!
https://www.thingiverse.com/thing:4350389

If you don't have your own 3D printer, then it might be better for you to find someone local to make one for you.
Top
 Profile  
 
leadslinger
PostPosted: Tue Nov 10, 2020 4:56 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
Canadianguy wrote:
Thanks! I wanna get a notch put in the top, hoping possible.


So you have a breech without a sight dovetail?

GMAC custom mills the back of the breech flat for use of the OEM 13xx/22xx rear sight, on some of their breeches. I got one that doesn't.

Personally rather then filing, I'd just get one for 3/8"-11mm groove the breech has.
Top
 Profile  
 
Canadianguy
PostPosted: Tue Nov 10, 2020 5:12 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Hang on hang on....i forgot it's aluminum breech not steel sorry. It's a left or right handed, got it from Alchemy Airwerks years ago

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Tue Nov 10, 2020 5:27 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
Canadianguy wrote:
Hang on hang on....i forgot it's aluminum breech not steel sorry. It's a left or right handed, got it from Alchemy Airwerks years ago


Almost like my Gmac custom one.

Without a jig, filing a rear sight notch squared, will be hard.

There is this option..

https://www.pyramydair.com/s/a/Crosman_ ... Mount/2008
Top
 Profile  
 
Canadianguy
PostPosted: Tue Nov 10, 2020 5:39 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Maybe I jumped the gun on the question milling the slot. I have no Idea. I've seen those ones before. Not sure on those

I would need it done right.

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Tue Nov 10, 2020 5:47 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
Canadianguy wrote:
Maybe I jumped the gun on the question milling the slot. I have no Idea. I've seen those ones before. Not sure on those


If I was going to do it, I would get it milled flat on the backside for using the OEM sight.

I have the same dilemma.. I got a LH GMAC breech on my 2289, and I want to run irons. Like a fool, I opted for no notch, or milled.

Guess I'll run a reddot, since a scope obstructs the loading.
Top
 Profile  
 
Canadianguy
PostPosted: Tue Nov 10, 2020 5:56 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
I am running the OEM sight i drilled the hole out bigger, Ive been using the hole, which one you using?

For pistols I noticed in the last year i need glasses for pistol. Either can't see the target or sights lol far sighted.

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Tue Nov 10, 2020 6:20 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
Canadianguy wrote:
I am running the OEM sight i drilled the hole out bigger, Ive been using the hole, which one you using?

For pistols I noticed in the last year i need glasses for pistol. Either can't see the target or sights lol far sighted.


I got zero sights on mine ATM.. Need a brake/front sight. Someone cut the barrel down to 12" and didn't file the flat for the OEM front sight. Then figure a rear sight..

They been on the back burner since getting my HW 45
Top
 Profile  
 
Woody
PostPosted: Wed Nov 11, 2020 6:01 pm 
Offline
Supporting Member 2009

Joined: Thu Sep 01, 2005 1:41 pm
Posts: 1029
Location: GTA
gctkaz wrote:
I found this 3D-printed item and installed it - works great and practically cost nothing!
https://www.thingiverse.com/thing:4350389

If you don't have your own 3D printer, then it might be better for you to find someone local to make one for you.



Sounds like a good opportunity for a member with a 3D printer. I bet they would sell quite a few here.
Top
 Profile  
 
Canadianguy
PostPosted: Sun Nov 15, 2020 7:42 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
leadslinger wrote:
Canadianguy wrote:
I am running the OEM sight i drilled the hole out bigger, Ive been using the hole, which one you using?

For pistols I noticed in the last year i need glasses for pistol. Either can't see the target or sights lol far sighted.


I got zero sights on mine ATM.. Need a brake/front sight. Someone cut the barrel down to 12" and didn't file the flat for the OEM front sight. Then figure a rear sight..

They been on the back burner since getting my HW 45



Leadslinger did you ever see these

https://www.ebay.ca/itm/Iron-Sight-for- ... %7Ciid%3A1

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Sun Nov 15, 2020 8:10 pm 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
Canadianguy wrote:
leadslinger wrote:
Canadianguy wrote:
I am running the OEM sight i drilled the hole out bigger, Ive been using the hole, which one you using?

For pistols I noticed in the last year i need glasses for pistol. Either can't see the target or sights lol far sighted.


I got zero sights on mine ATM.. Need a brake/front sight. Someone cut the barrel down to 12" and didn't file the flat for the OEM front sight. Then figure a rear sight..

They been on the back burner since getting my HW 45



Leadslinger did you ever see these

https://www.ebay.ca/itm/Iron-Sight-for- ... %7Ciid%3A1


Yes I did..

I found this in my tool box. With a low profile adapter, it should work. I might just need to get a taller front sight pin for my muzzle brake.

https://www.amazon.ca/UTG-Sub-Compact-S ... B00S0QVK4G
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO