Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Oct 28, 2021 4:17 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.






Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Sep 06, 2021 10:50 am 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 30
When I order a small item, I usually add some pellets to justify shipping costs. In this case it was a barrel band, shipping was more than the part, so I added some H&N Lite hollow points to the order.
If you don't try them all you will never Know.
Attachment:
tins.jpg
tins.jpg [ 307.24 KiB | Viewed 148 times ]
The box arrived 9 days later, loaded them up in the 7 shot mag, grabbed the crony out to the shed I went. It was very hard to push these past the breach seal. The 7th one turned sideways and jammed 1/2 in the chamber 1/2 in the mag. I mistakenly pulled the bolt back to far allowing the mag to advance to the zero position. With one hand I rotated the mag and with the other I pushed a rod down the barrel. I was able to push the mangled pellet back into the mag. The breach seal may be a little oversized but has worked well up till now. Lately I have been using lite pellets on the rodents with better results and I had high expectations for these pellets, but that was quickly dashed. I also tried these in my 1322 but the sharp edge jams in the breach screw countersink, they do however drop straight in if I hold the pistol point down. They do crony above average in the 1322. In the picture you can see the sharp edge on the front face


Attachments:
pellet.jpg
pellet.jpg [ 245.19 KiB | Viewed 148 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO