Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Fri Mar 29, 2024 1:53 am

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.







Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Nov 03, 2021 8:57 am 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 551
Location: East Of Hamilton
In the Fusion 2 paperwork it states "no work can be performed on this gun because special tools are required". 2 allen wrenches, a 3/32 punch, and a wood mallet, thats it. Wanted to replace the trigger spring with a piece of o ring but used a pen spring. I opened the barrel port to .125 from .055, may be a little big, 71 % of bore. The body and the breach is a single piece of plastic. The only part that I didn't remove is the back half of the valve as it was pressed in. Not many parts to this gun. Breathing on Hpa at 1050 psi it now firing at 753 fps up from 452. Yes I do keep it locked up with all the other pals.
Attachment:
Fusion 2 parts.jpg
Fusion 2 parts.jpg [ 282.81 KiB | Viewed 916 times ]


Top
 Profile  
 
PostPosted: Sun May 15, 2022 9:56 am 
Offline

Joined: Sun May 15, 2022 9:54 am
Posts: 1
Did you have to increase the hammer spring tension? If so what did you do for this?


Top
 Profile  
 
PostPosted: Sun May 15, 2022 3:56 pm 
Offline

Joined: Tue Apr 27, 2021 7:53 am
Posts: 551
Location: East Of Hamilton
I have not modded the hammer spring. I have since this post, converted the fusion to HPA .https://www.airgunforum.ca/forums/topic91365.html


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO