Canadian Airgun Forum

Thanks to 'ineedpal'... Again~ [emoji38]

Got this 3D printed trigger blade from the gentleman and put it on this evening.

Feels much better than the stock narrow one mainly because the much wider blade area accepts the pulling force from the finger tip much better than before. And which makes me feels no more about the little creep at the end of the first stage.

To my experience so far, I will keep this trigger blade on from now on.

Just a reminder, while you put it on, you need to remove the trigger guard which holds the 3rd trigger adjustment screw (the one to the rear end which compressing the trigger force spring), and watch out the spring bounce off. It doesn't likely do so, at least not on mine. But when I finished the trigger and put back on the guard, I saw that small spring poke out (still attached to the action), I was sacred as I didn't expect that and thanks it's still there...

Got almost a full set of upgrade parts from ineedpal for the cz200 recently... Looks everything is good, very good~ I love every single piece I put on my cz200~

Still have a single shot loader I didn't try yet, it looks very good tho! And the soft touch air tube shimmer kit I put on both my tubes. However the Altaros tube already got the depinger, so I didn't hear much difference and I didn't shoot with the stock steel tube yet... Let's wait and aee...

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

Glad you like it Ken! Somehow you take much better pictures than I do

Not really ~ I used the picture you sent me directly for the depinger ~

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

An update picture for the shimmer kit... I think I can use either one or two or all three (is that right? ineedpal?)... As they are different thickness and the thinner one is softer in between the two thicker one, I keep them all in like a sandwich for best result...

(don't ask me why not put a depinger in the steel tube.... You won't even want to try to remove those original brass end caps... )

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

The shim kit isn't related to depinger. It helps to change the cylinder to receiver contact area from the oring to the brass part. This way you get a much more consistent valve strike and velocity.

And yes you get 3 shims of different thickness. You pick the one or a combo that works the best. The goal is to get good seal but not overly tight.

I checked and found the striker stem poke out from the action has some clearance / free in and out distance which should be supported by a small spring that you can push it in a little bit without effort by using your finger tip...

I think this design is for the purpose like the shimmer kit?

And how can I know the perfect thickness I should use?

And I think the softer material shim in between two harder metal contacting surface will be good even without other advantages~

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

Okay ~ I think how many shims I should use is depending on the valve o ring thickness? The target is don't let the o ring being compressed too much but still need a well and tight seal around the valve, right?

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

You got it