Hi everybody!
Think this can help other people who like springer bullpups but they only find the terrible QB57 ( I had one, tuned from original 7ft-lbs to 9ft-lbs, but this tune-up almost destroy it
I had to weld the end of the compression cylinder. Besides, under a layer of varnish, wood is full of putty).
Tha base was a common Norica Dragon, with the terrible 515 trigger, smoother bay sanding. I use cherry tree wood and hand tools to carve it. The trigger now is pushed by a threaded rod. The trigger is made by hand with a block of aluminium. This "false" trigger turns into a wood screw, so you can take off the screw and the other usual 3 screws of the action and you can take off teh complete action, the rod and the "false" trigger. Stock has an oil finish only.
The design has two fails:
1.- In order to use open sights, I had to made wider stock, to up the action over the shoulder. So stock is heavy.
2.- Due to this alignment, when you shoot, muzzle try to turn up because the unaligned forces of recoil and shoulder support.
Attachment:
File comment: Norica self-made bullpup
ResizerImage1552X873.jpg [ 134.01 KiB | Viewed 818 times ]
Attachment:
File comment: detail: grip.
ResizerImage1552X873_2.jpg [ 141.54 KiB | Viewed 818 times ]
Attachment:
File comment: You can see the screw that holds the fake trigger.
ResizerImage1552X873_3.jpg [ 174.69 KiB | Viewed 818 times ]