Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Jan 26, 2023 5:21 pm

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!


You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Wed May 18, 2022 8:18 am 

Joined: Tue Apr 27, 2021 7:53 am
Posts: 310
Location: East Of Hamilton
First Off
The outer box was destroyed before arrival, the delivery truck had smashed windows, the thief did not get my gun out of the window, but boy did they try. It is entry level PCP so overall I am happy with purchase. With a few mods it may be worth the money

1:I like the safety, it is a trigger shaped safety, that when on is tight up against the trigger. It is a little wider than the trigger so it easy to push forward to the fire position. It can be pushed forward with no click sound.

2:Hammer spring is easy to adjust with an Allen wrench while the gun is fully assembled

3: The mag is easy to load, post wind type with a O ring retainer, pellets stay in place, no chatter. 12 shot with a side window for shot count.

4: Both sights are easy to remove and reinstall

5: Lots of power it can push a 15.74 gr pellet at 880 FPS , 27 fpe in a .177. Impressive for an entry level PCP. With a standard weight pellet (7.4 gr) it is usable down to 1000 PSi around 75 shots


1:2 stage trigger is very stiff only the length of 2nd stage is adjustable but the screw on mine is so tight, I could not turn it. A full disassembly of the trigger will be required to modify the spring.

2: The crown is poorly cut, much deeper on one side than the other, and because of this accuracy is an issue. Up to 1.5 mm of the barrel may need to be removed before the crown can be re cut

3: Stock forearm has no mount points, bottom of forearm is not flat. I will need to plane down flat, before attaching a Pic rail

Well guys, that all I got right now, once I fix the crown I will get it the range.

Till then, have a great day

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group