177 Artemis M16 FT Tuning Review

View unanswered posts | View active topics

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 3 of 3

[ 36 posts ]

Go to page Previous 1, 2, 3

Print view

Previous topic | Next topic

Author

Message

tom_ke888

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Sat Jan 07, 2023 3:38 pm

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 914
Location: Guelph, Ontario

Daryl wrote:

You did a fine job on it.

Thanks Daryl, I felt like buying a drill press for doing this job, but I was over-ruled.

So, I must accept the result. See the wood plugs that came off the hole saw tips.

我從使用 Tapatalk 的 TAS-AL00 發送

_________________
AirArms TX200HC
AirArms S400F
Diana Outlaw
Feinwerkbau 300S
FX Dreamline Classic
Weihrauch HW100KT FSB
Weihrauch HW97KT
Weihrauch HW50S
Artemis M16
Artemis PP700
Weihrauch HW40
Beeman P17
Stoeger XP4

Top

Daryl

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Sat Jan 07, 2023 4:23 pm

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11369
Location: P.G. B.C.

With some modicum of skill, it is surprising what can be accomplished. I made a primer firing device for my cap lock rifle when I could not buy percussion caps in
Smithers, back in the 70's. I used an adjustable 3/8" electric drill held in the jaws of my bench vice - as a lathe, using files to turn down rods of steel for the 3-piece
device. Primer holder, threaded to fit the 1/4x28 nipple thread. Cap that screwed onto the top of the primer holder that holds the captured striker (firing pin). Saw a
picture of one someone made back in the late 1870's for use in machine rest competitions. Knew the concept so I made one. However, what you guys doe with air rifles,
Bsteren included escape my understanding.

_________________
Best Wishes
Daryl

Top

tom_ke888

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Wed Feb 22, 2023 12:11 pm

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 914
Location: Guelph, Ontario

Received 22mm aluminum tube, cut it to length and glue onto the stocks of my Outlaw and M16. Now the reg gauges looked like factory installed.

我從使用 Tapatalk 的 TAS-AL00 發送

Last edited by tom_ke888 on Wed Feb 22, 2023 12:25 pm, edited 1 time in total.

Top

YepYep

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Wed Feb 22, 2023 12:16 pm

Joined: Wed Jul 26, 2017 7:01 pm
Posts: 5150
Location: GTA, ON

well~ i can say better than stock~ :thumbs:

_________________
~Plinkers~
FX-M3-22 Compact#PP700-Carbine#Diana48-177#XS28M-25@26fpe#HW45 Beast#AW-Custom Z-Killer DE
~Competitors~
FWB300SU#Tau-7#IZH-46M#FWB-65#CP88-C
~Target~
HW 30s/35e/97k/40+Extender/P3+Scope/70#CZ200s Laminated@10fpe#AA ProSport-177@12fpe

Top

Daryl

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Wed Feb 22, 2023 12:33 pm

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11369
Location: P.G. B.C.

Looks GREAT! :shock:

_________________
Best Wishes
Daryl

Top

tom_ke888

Post subject: Re: 177 Artemis M16 FT Tuning Review

Posted: Wed Feb 22, 2023 1:16 pm

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 914
Location: Guelph, Ontario

thanks guys

我從使用 Tapatalk 的 TAS-AL00 發送

Top

Page 3 of 3

[ 36 posts ]

Go to page Previous 1, 2, 3

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum