Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 18, 2024 9:51 pm

View unanswered posts | View active topics


Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 2 of 6
  [ 83 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
  Print view Previous topic | Next topic 
Author Message
Skanzy
PostPosted: Sun Jan 29, 2023 5:07 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
tom_ke888 wrote:
Very interesting project, and very costly.[emoji12] Now you have a one of a kind unique airgun. Congratulations!

我從使用 Tapatalk 的 TAS-AL00 發送


Thanks, I was able to sell the original stock, 600mm barrel kit and some other parts to fund some of the project. The only thing left to buy is the FX no limit scope mounts. Almost time to shoot it over the chrony and tune the gun.

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sun Jan 29, 2023 6:47 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
I think that a may have enlarge this hole to take full advantage of the added plenum space.


Attachments:
20230129_064327.jpg
20230129_064327.jpg [ 241.67 KiB | Viewed 2348 times ]
20230129_064349.jpg
20230129_064349.jpg [ 533.93 KiB | Viewed 2348 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sun Jan 29, 2023 7:57 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Not pretty but the hole is larger, hope the air can move through the plenum without so much restriction now.


Attachments:
1674996593333371169571.jpg
1674996593333371169571.jpg [ 583.58 KiB | Viewed 2347 times ]

_________________
SKANZY
Top
 Profile  
 
Daryl
PostPosted: Sun Jan 29, 2023 1:39 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11353
Location: P.G. B.C.
Hope you didn't go too far???

_________________
Best Wishes
Daryl
Top
 Profile  
 
Skanzy
PostPosted: Sun Jan 29, 2023 4:00 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Daryl wrote:
Hope you didn't go too far???



I could have went more, I do not want the air to be restricted. The gun is all back together and everything seems to be working ok.

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Mon Feb 06, 2023 11:40 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
FX No limit mounts


Attachments:
1675701521262487970381.jpg
1675701521262487970381.jpg [ 602.16 KiB | Viewed 2316 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Mon Feb 06, 2023 12:18 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Did not have time to do a full shot string or any tuning, I just filled the gun and shot until I got a chrony reading.

1041fps with 25.4gr JSB
61 FPE
Reg just below 150 bar
Hammer spring almost maxed out


Attachments:
20230206_120445.jpg
20230206_120445.jpg [ 632.31 KiB | Viewed 2314 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Fri Feb 10, 2023 10:18 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
The hammer that comes with the gun weighs 13.2 grams. I removed the original hammer and installed a 14.5 gram hammer. Airgunsource has the tungsten hammers in stock so I grabbed one. The Tungsten hammer weighs 26.8 grams. I thought the tungsten hammers were for 800mm barrels but I read an advetisement from FX that they can be used on 700mm so I am going to try it out during the tuning process.


Attachments:
1676041889749312669909.jpg
1676041889749312669909.jpg [ 610.63 KiB | Viewed 2278 times ]
1676041864416869018625.jpg
1676041864416869018625.jpg [ 636.14 KiB | Viewed 2278 times ]
1676041789039518293688.jpg
1676041789039518293688.jpg [ 619.33 KiB | Viewed 2278 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Fri Feb 10, 2023 10:52 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Tungsten hammer installed


1032 FPS with 28gr. Slug
66 FPE


Attachments:
20230210_104916.jpg
20230210_104916.jpg [ 467.55 KiB | Viewed 2275 times ]

_________________
SKANZY
Top
 Profile  
 
Daryl
PostPosted: Fri Feb 10, 2023 2:18 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11353
Location: P.G. B.C.
.22 cal? I see Mat D. likes the 40gr. slugs in his 700mm barreled Impact, but shoots 26gr. slugs in his short Impact.

_________________
Best Wishes
Daryl
Top
 Profile  
 
Skanzy
PostPosted: Fri Feb 10, 2023 3:00 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Daryl wrote:
.22 cal? I see Mat D. likes the 40gr. slugs in his 700mm barreled Impact, but shoots 26gr. slugs in his short Impact.


.25 cal.

_________________
SKANZY
Top
 Profile  
 
Daryl
PostPosted: Fri Feb 10, 2023 7:24 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11353
Location: P.G. B.C.
The Tungsten hammer doesn't seem to be doing much.
Makes me wonder how that setup will shoot the Hybrids?

_________________
Best Wishes
Daryl
Top
 Profile  
 
Skanzy
PostPosted: Sat Feb 11, 2023 9:24 am 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Daryl wrote:
The Tungsten hammer doesn't seem to be doing much.
Makes me wonder how that setup will shoot the Hybrids?



I agree with you about the tungsten hammer, I may be wasting air and that will also make the gun less accurate.

25 cal. 26gr. FX Hybrid slugs
1046 FPS
63 FPE


Attachments:
20230211_091823.jpg
20230211_091823.jpg [ 492.01 KiB | Viewed 2244 times ]

_________________
SKANZY
Top
 Profile  
 
Daryl
PostPosted: Sat Feb 11, 2023 2:24 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11353
Location: P.G. B.C.
About wasting air - I need to pull the action out of the stock and reduce the hammer spring weight. It's almost maxed out but with reg. at 100 bar, I got 151 shots out of a fill.
Transfer port on on LOW. If I reduce the spring pre-load, I should get even more shots. I suspect at some point the velocity would be reduced, but not much I'd think.
Or was that count with the Condor? Now I'm confused. Oh no - both rifle's count is close concerning the Condor, but it has almost double the tank size & is running more power
of course.

_________________
Best Wishes
Daryl
Top
 Profile  
 
Skanzy
PostPosted: Sat Feb 11, 2023 8:56 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Bump the reg. up slightly so it is at 150bar
Hammer spring maxed out
.25 cal. 25.4gr. JSB
1100 FPS
68 FPE


Attachments:
20230211_202249.jpg
20230211_202249.jpg [ 460.52 KiB | Viewed 2223 times ]

_________________
SKANZY
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 6
  [ 83 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO