Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 25, 2024 3:31 pm

View unanswered posts | View active topics


Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 6
  [ 83 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
  Print view Previous topic | Next topic 
Author Message
Skanzy
PostPosted: Sat Jan 28, 2023 1:47 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
I got a FX Dreamline, walnut stock .25 cal. from airgunsource not too long ago. Compared to other FX guns this model has less power. Other model FX guns have a VP or sniper edition, this model usually has a larger plenum and longer barrel. The Dreamline does have a Power Pup model, it has a 700mm barrel and 80cc plenum but in a bullpup stock that I have not seen here in Canada. I decided that I am going to make a Power Classic, although I never seen this model for sale. The plan is to take my Dreamline Classic and mod it for maximum power to make a Power Classic just like FX did to the Dream Pup to make it the Power Pup.


This is what the gun looks like now.


Attachments:
fx-dreamline-classic-walnut-_1_.jpg
fx-dreamline-classic-walnut-_1_.jpg [ 11.81 KiB | Viewed 2310 times ]

_________________
SKANZY


Last edited by Skanzy on Sat Jan 28, 2023 3:45 pm, edited 1 time in total.
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 1:57 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
I like the walnut stock but it is not adjustable, I was lucky enough to get the last GRS stock at airgunsource. The stock is full adjustable and has a UIT or anschutz rail on the bottom, I plan to shoot this gun off a tripod.


Attachments:
1674932086708273820240.jpg
1674932086708273820240.jpg [ 692.63 KiB | Viewed 2305 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:09 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
The .25 cal. Dreamline comes with a Super Lite 600mm barrel system. I bought a .25 cal. 700mm Impact barrel system to replace it. I have the carbon fiber liner sleeve to replace the o- rings, I also have a 20x14mm carbon fiber shroud to replace the thin aluminum shroud and now I can add tension to the barrel. I am going to put an air stripper or tuning weight on the barrel.

Top of photo is the Dreamline barrel
Impact barrel
20x14 carbon fibre shroud, needs to be cut to length
Carbon fibre sleeve


Attachments:
1674932936155655842090.jpg
1674932936155655842090.jpg [ 617.12 KiB | Viewed 2300 times ]
1674932795421746375278.jpg
1674932795421746375278.jpg [ 638.4 KiB | Viewed 2300 times ]

_________________
SKANZY


Last edited by Skanzy on Sat Jan 28, 2023 3:51 pm, edited 5 times in total.
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:14 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
100mm barrel extension, I may not use this piece but if I want to upgrade to a 800mm barrel down the road, I can.


Attachments:
1674933220153384055301.jpg
1674933220153384055301.jpg [ 601.88 KiB | Viewed 2298 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:16 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
FX barrel weight tuner and Hatsan air stripper


Attachments:
16749333892611395077863.jpg
16749333892611395077863.jpg [ 563.27 KiB | Viewed 2295 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:20 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Hi flow pin probe
Heavy hammer
High power hammer spring
Brass jam plate
High flow v2 transfer port
FX Dreamline barrel band


Attachments:
16749336041581132920250.jpg
16749336041581132920250.jpg [ 606.75 KiB | Viewed 2294 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:29 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
FX Wildcat MKII 2.5" plenum. This plenum also fits the Dreamline and is larger then the 17cc Dreamline power plenum. I think this plenum is around 38cc and the gun has an estimated plenum of 30cc so the gun will have around 68cc total plenum. My goal is 68 FPE with all the mods and ten shots. I have two of these plenums but only plan to use one. If I can not reach my goal then I can reconfigure the gun with two 2.5" plenums and try again.


Attachments:
16749338272121557062452.jpg
16749338272121557062452.jpg [ 631.39 KiB | Viewed 2291 times ]

_________________
SKANZY


Last edited by Skanzy on Sat Jan 28, 2023 3:48 pm, edited 1 time in total.
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:33 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
I have a Huma reg, 30cc plenum and 10cc plenum that I may use depending on how the tuning goes.


Attachments:
16749343629711929804287.jpg
16749343629711929804287.jpg [ 544.55 KiB | Viewed 2289 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:34 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
FX 16 shot, FX 10 shot mini mag, 3D printed 10 shot and single shot tray.


Attachments:
1674934454706256947225.jpg
1674934454706256947225.jpg [ 632.74 KiB | Viewed 2289 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 2:39 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Element Helix 6-24x50 SFP


Attachments:
16749347475561162792300.jpg
16749347475561162792300.jpg [ 624.8 KiB | Viewed 2287 times ]

_________________
SKANZY
Top
 Profile  
 
Daryl
PostPosted: Sat Jan 28, 2023 2:44 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11367
Location: P.G. B.C.
Quite a venture. Stock stock (lol) was a very nice plank.

Skanzy, were did you get all the
(Hi flow pin probe
Heavy hammer
High power hammer spring
Brass jam plate
High flow v2 transfer port
FX Dreamline barrel band) parts from?
Is the high flow V2 transfer port larger or a different shaped hole than the HIGH setting on the adjustable one?

_________________
Best Wishes
Daryl
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 3:14 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Daryl wrote:
Quite a venture. Stock stock (lol) was a very nice plank.

Skanzy, were did you get all the
(Hi flow pin probe
Heavy hammer
High power hammer spring
Brass jam plate
High flow v2 transfer port
FX Dreamline barrel band) parts from?
Is the high flow V2 transfer port larger or a different shaped hole than the HIGH setting on the adjustable one?


I bought all those parts from Huma Air and 910 airguns

The brass transfer port is what I am talking about, not the adjustable wheel

The V2 transferport is slightly larger than the stock FX.
In the pictute the is V2 on top, bottom is stock


Attachments:
1674937196679824040249.jpg
1674937196679824040249.jpg [ 606.67 KiB | Viewed 2281 times ]
16749366065621170401469.jpg
16749366065621170401469.jpg [ 658.41 KiB | Viewed 2282 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 4:39 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
Added the 2.5" plenum, stronger hammer spring, heavier hammer ( middle weight) V2 transfer port, pin probe, carbon fibre liner sleeve and 700mm barrel with superior liner. I still have to cut the carbon fiber tension shroud but it is going to be close, the tube extends farther than I anticipated . If it does not work then I will have to remove the FX reg. and install the Huma reg. I would gain a bit of plenum but loose air in my reservoir and also loose the abiliy to adjust the reg. externally.


Attachments:
1674941804720579242463.jpg
1674941804720579242463.jpg [ 556.13 KiB | Viewed 2266 times ]
167494177637420421005.jpg
167494177637420421005.jpg [ 572.77 KiB | Viewed 2266 times ]
16749417031502124430867.jpg
16749417031502124430867.jpg [ 576.85 KiB | Viewed 2266 times ]

_________________
SKANZY
Top
 Profile  
 
Skanzy
PostPosted: Sat Jan 28, 2023 5:15 pm 
Offline
User avatar

Joined: Mon Dec 24, 2012 2:51 am
Posts: 700
Location: Ingersoll, Ontario
It worked!!!! Carbon fibre tension shroud installed, decided to go with the air stripper and try the FX barrel tuner weight later on. Aslo left the barrel band off for now to see if the tension barrel system is enough to prevent POI shift. I am going to trim a few millimeters from the air stripper so it is flush with the shroud OD. The gun is now 1200mm or 47 1/4" inches long. Lol


Attachments:
16749440563601679224211.jpg
16749440563601679224211.jpg [ 538.82 KiB | Viewed 2262 times ]
1674944026116635646820.jpg
1674944026116635646820.jpg [ 478.74 KiB | Viewed 2262 times ]

_________________
SKANZY
Top
 Profile  
 
tom_ke888
PostPosted: Sun Jan 29, 2023 12:23 am 
Offline
User avatar

Joined: Sun Jul 01, 2018 10:37 pm
Posts: 912
Location: Guelph, Ontario
Very interesting project, and very costly.[emoji12] Now you have a one of a kind unique airgun. Congratulations!

我從使用 Tapatalk 的 TAS-AL00 發送

_________________
AirArms TX200HC
AirArms S400F
Diana Outlaw
Feinwerkbau 300S
FX Dreamline Classic
Weihrauch HW100KT FSB
Weihrauch HW97KT
Weihrauch HW50S
Artemis M16
Artemis PP700
Weihrauch HW40
Beeman P17
Stoeger XP4
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 6
  [ 83 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO