Artemis CR600 CO2 .22 sight issue

View unanswered posts | View active topics

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

80Indy

Post subject: Artemis CR600 CO2 .22 sight issue

Posted: Wed May 24, 2023 11:38 am

Joined: Fri Feb 11, 2022 1:17 pm
Posts: 32

I bought my first CO2 rifle. I have springers and multi pumps.
I kind of like it. It'd a bit smaller and lighter than I thought it would be.
It does around 535 fps.
The only issue I have is with the rear sight, very little adjustment left of right.
The sight has maybe 5 notches on each side of center but you can barely move it past one.
Has anyone noticed this?

Top

Knappr

Post subject: Re: Artemis CR600 CO2 .22 sight issue

Posted: Wed May 24, 2023 12:22 pm

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

Just wondering if you have a second barrel band installed? If so loosen it and slight roll it in the direction that starts making a difference. I’ve had the same issue

Also adjusting the sight requires you to loosen the left or right side of the windage adjuster before tighten in the direct you want to go. Ex need to move sight to the right, loosen left side first then tight the right side, then make sure both are tight after the adjustment is complete

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

wesb2007

Post subject: Re: Artemis CR600 CO2 .22 sight issue

Posted: Sat May 27, 2023 11:20 am

Joined: Sat Nov 05, 2016 10:52 am
Posts: 3967
Location: Caronport, Saskatchewan

Yep loosening the side you want it to move towards is key. Otherwise you won't have any adjustment available to speak of, as mentioned above.

Sent from my SM-A536W using Tapatalk

_________________
Website: https://airgunarcheryfun.ca/

Top

Page 1 of 1

[ 3 posts ]

Board index » Main Forum » Airgun Reviews

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum