Cr 600 with gen 2 stormrider trigger possible?

View unanswered posts | View active topics

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Cr 600 with gen 2 stormrider trigger possible?

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Jmclean85

Post subject: Cr 600 with gen 2 stormrider trigger possible?

Posted: Tue Jan 09, 2024 7:43 pm

Joined: Sun Jan 04, 2015 3:53 pm
Posts: 332

I have one of Wes’s cr600/stormrider conversions. And looking to get another one in .25 soon. I’m wondering, would it be possible to put the Diana Improved Trigger from the gen 2 stormrider onto one of these? I really prefer the breaking point of a 2 stage trigger.

_________________
fishing, hunting and rap music.

Top

Knappr

Post subject: Re: Cr 600 with gen 2 stormrider trigger possible?

Posted: Tue Jan 09, 2024 8:33 pm

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

I personally don’t see why not, as long as you can get your hands on the parts.

Personally I find I can make both types of triggers work the same. I didn’t find the Diana trigger anymore adjustable the the Artemis as the bolts in the Diana were to short to do anything with, out of the box. In my stormrider review I mentioned what I did to improve my stormrider trigger. The Dragonfly mk2 comes with the typical Artemis trigger and I’m slowly getting it where I want it but I wish I had some the trigger screws that come with the Diana trigger so can add one to the dragonfly.

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

Jmclean85

Post subject: Re: Cr 600 with gen 2 stormrider trigger possible?

Posted: Tue Jan 09, 2024 11:02 pm

Joined: Sun Jan 04, 2015 3:53 pm
Posts: 332

I’ve been able to track down most of the parts. I was just hoping maybe someone beat me to it and had it working already :lol:

. The single stage Artemis isn’t a bad trigger by any means. I’m just more confident shooting a 2 stage trigger.

_________________
fishing, hunting and rap music.

Top

Knappr

Post subject: Re: Cr 600 with gen 2 stormrider trigger possible?

Posted: Wed Jan 10, 2024 6:04 am

Joined: Fri Jul 16, 2010 4:09 pm
Posts: 1249
Location: Southern Ontario, Canada

From what I’ve seen both triggers are physically the same. The Artemis trigger only has one hole with a set screw which needs to be removed for any kind of adjustment. While the Diana has two holes drilled right threw it, which allows the adjustments to be made with trigger blade installed. I didn’t like the trigger in my stormrider out of the box, too much travel. I tried the screws but even when bottomed out I noticed no real changes plus the thread engagement of the screws wasn’t that great and the screws just vibrated out.

_________________
Steoger XP4 .177
Hatsan AT44MW-10 .177
Daisy 953S .177
Artemis CR600W .177
Diana Stormrider .177
Seneca Dragonfly MK2 .177

Top

Page 1 of 1

[ 4 posts ]

Board index » Main Forum » Mods and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum