Canadian Airgun Forum

Yesterday I shot from.177 to 50 cal., 1 stage triggers at 7oz to 2 stage at 4.2 lbs, single loaders to 14 shot mags, guns that needs earplugs to one that is fart quiet.

The major that stood out was how quiet a 610 fps gas ram break barrel was. All the PCP that are in the 1000 fps range have a major bark. When I cut the power back on the PCP to 500 fps I still could not match the noise level of the gas ram. IF was able to alter the 7oz trigger pull to a 2 stage with a 1 lbs second that to me would be the ultimate.

I would like a gas ram break barrel where you could use the 4500 psi hand pump to change the gas charge in the ram to suit the daily power needs. Have a bleed screw to lower the pressure and a hand pump to increase. OK manufactures I am waiting, I will be first to buy. In a bullpup, underlever, with a 10 shot mag. It be called the "The select GRam 10"

My dream of the day
Robert

You need a HW90
https://hardairmagazine.com/reviews/wei ... 7-caliber/

_________________

))))----//----------==
Iacio, ergo sum

HW90 is my guess. I was quite shocked that the velocities were so high with it and of course, questions as to the accuracy with .177"
13gr. pellets and 12.5gr. slugs came to mind.
Here is the Hard Air tuning test on that rifle.
https://hardairmagazine.com/reviews/wei ... to-expect/

_________________
Best Wishes
Daryl

All of them out in one day - that would be a LONG day, even with only air rifles/pistols.

_________________
Best Wishes
Daryl

Daryl it all started when I switched my YH compressors from compressor oil over to synthetic motor oil. I proceeded to take out the pcps and bring them up to full charge 10 pcps, 2 break barrels and one 22 lr no air required. The 50 cal is only 4 shots, then one or 2 mags in each gun. Once I get 200 rounds into paper that is day for me. Now if I out following something in the bush that I could do all day.

Robert