Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Stock for P1/HW45
https://www.airgunforum.ca/forums/topic60554.html
Page 1 of 1

Author:  flyr [ Wed Feb 12, 2014 4:53 pm ]
Post subject:  Stock for P1/HW45

Hi Guys,
A while ago I was on here with a request for info on a carbine stock for my P1. I received lots of info (thanks) but unfortunately no leads on a reasonably priced stock.
So I decided to make something up myself(still a bit crude but it works very well) I used an adjustable carbine stock for a Glock airsoft pistol and modified it to fit my P1 by making adapter spacers under the grip panels to mate up with it. It's very solid and is adjustable rearward to a couple of positions if you want to use a dot or the iron sights. I plan to do a bit more refining but all in all I think it turned out OK for an expenditure of under $30.
Here it is.

Image
Image
Image

Author:  rrdstarr [ Wed Feb 12, 2014 5:41 pm ]
Post subject:  Re: Stock for P1/HW45

Looks like you accomplished what you set out to do!

Nice!

Author:  flyr [ Wed Feb 12, 2014 6:02 pm ]
Post subject:  Re: Stock for P1/HW45

Not quite where I want it but it works well,1/2"- 3/4" groups at 10m standing offhand(if I concentrate) The gun will do one ragged hole rested :D

Author:  rrdstarr [ Wed Feb 12, 2014 6:06 pm ]
Post subject:  Re: Stock for P1/HW45

flyr wrote:
Not quite where I want it but it works well,1/2"- 3/4" groups at 10m standing offhand(if I concentrate) The gun will do one ragged hole rested :D


Yup I am all in the 10 and X ring shooting offhand a 10m. Nice gun the HW75 is.

Author:  rav [ Wed Feb 12, 2014 6:23 pm ]
Post subject:  Re: Stock for P1/HW45

Quote:
rrdstarr wrote
Yup I am all in the 10 and X ring shooting offhand a 10m. Nice gun the HW75 is.


This is the second time (topic60440) you are mixing up your HW 75 with the HW 45 which flyr has. I understand that you love your HW 75 but the HW 45 is a completely different pistol and more difficult to shoot accurately than the HW 75. :wink:

Author:  flyr [ Wed Feb 12, 2014 6:53 pm ]
Post subject:  Re: Stock for P1/HW45

I can tell you one thing though, with the stock collapsed (to get proper eye relief with the 3-9 bug buster) the transfer port and spring are a couple of inches away from your face and you can really tell things are happening when you pull the trigger(not sure if it has something to do with vibration/sound transferred through the stock) :shock:

Author:  Plinkercases [ Wed Feb 12, 2014 7:16 pm ]
Post subject:  Re: Stock for P1/HW45

Very cool rig. Good work.

Author:  spinoza [ Tue Apr 23, 2019 2:12 pm ]
Post subject:  Re: Stock for P1/HW45

That's a great stock mod for your HW45!

I've been trying to decide on whether I want to try and make a stock for my Beeman P-1 out of wood, and then last month, I saw one of those Glock carbine retractable stocks on eBsy from a seller in Shanghai for total cost of $25 CDN, and I ordered one.

I hadn't decided how I was going to modify it, and your idea is excellent!
Did you make the metal under-grip mounting adapter from sheet metal?

Attachments:
IMG_20180521_141902_519.JPG
IMG_20180521_141902_519.JPG [ 42.14 KiB | Viewed 336 times ]

Author:  flyr [ Tue Apr 23, 2019 2:48 pm ]
Post subject:  Re: Stock for P1/HW45

Yes,
I think it was some .080" aluminum.(an old commercial pizza lifter)
You will have to find some longer grip screws if you go the same route as the added .160" makes the factory screws too short.
I think if I were to do it again I might try it with .040" aluminum, I think it would be sturdy enough with the plates on both sides.
Good luck!

Author:  BB1Shooter [ Tue Apr 23, 2019 3:56 pm ]
Post subject:  Re: Stock for P1/HW45

Would something like this:

https://www.pyramydair.com/s/a/Smith_We ... Stock/8683

Or this:

https://www.ebay.com/itm/Tactical-Suppo ... SwIS9b8qdg

Work. And would they be usable on other pistols & revolvers?

Author:  flyr [ Tue Apr 23, 2019 4:29 pm ]
Post subject:  Re: Stock for P1/HW45

The one on ebay that you posted the link to, is the one I used for my P1/HW45(original post),it's also the one that member"spinoza" has ordered.
The grip attachment will have to be modified for the specific pistol you want to use it on.

Author:  spinoza [ Fri May 10, 2019 3:18 pm ]
Post subject:  Re: Stock for P1/HW45

Thanks for the extra info for making the spacers!
That eBay post is the Glock stock that I bought.
I still have to get a couple of things before I can started.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/