Filling in the front breech pita screw hole on a 22xx?

View unanswered posts | View active topics

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Filling in the front breech pita screw hole on a 22xx?

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Canadianguy

Post subject: Filling in the front breech pita screw hole on a 22xx?

Posted: Wed Oct 04, 2017 3:51 pm

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto

I'm just looking for some ideas on filling that front breech pita screw hole, where the pellet gets caught up. Someone mentioned using clear 5 min epoxy.

Any suggestions would be appreciated!

Thanks

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32

Top

airmec

Post subject: Re: Filling in the front breech pita screw hole on a 22xx?

Posted: Wed Oct 04, 2017 4:04 pm

Joined: Thu May 07, 2015 8:30 pm
Posts: 1950
Location: Eastern Townships

Candle wax. Easy to remove if you have to, but strong enough to stay put :wink:

_________________
If everything's so lovely yeah, then why don't I, why don't I, why don't I, why don't I feel lovely?

Top

MyCrosman

Post subject: Re: Filling in the front breech pita screw hole on a 22xx?

Posted: Wed Oct 04, 2017 4:12 pm

Joined: Thu Oct 04, 2012 10:27 am
Posts: 1430
Location: Thunder Bay,On.

.....or that stuff called "Goop"....turns into a hard rubber but you can pull it off easy with needle nose or whatever if you need to......you can form it too after it settles a bit....

_________________
The cave you fear to enter....holds the treasure you seek

Top

Canadianguy

Post subject: Re: Filling in the front breech pita screw hole on a 22xx?

Posted: Wed Oct 04, 2017 4:16 pm

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto

That's intresting to...I actually have some auto goop!

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32

Top

Gippeto

Post subject: Re: Filling in the front breech pita screw hole on a 22xx?

Posted: Wed Oct 04, 2017 9:08 pm

Joined: Tue Jun 03, 2008 5:46 pm
Posts: 3009
Location: Canada

airmec wrote:

Candle wax. Easy to remove if you have to, but strong enough to stay put :wink:

Top

Canadianguy

Post subject: Re: Filling in the front breech pita screw hole on a 22xx?

Posted: Tue Nov 21, 2017 12:59 pm

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto

If I don't take the reciever off,will any of the wax fall down the pita screw hole into the tube?

Will wax leave any wax residue into the barrel?

I guess I could put a piece of tape at the bottom of the hole.

I figured it out!

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32

Top

Page 1 of 1

[ 6 posts ]

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours

Who is online

Users browsing this forum: Majestic-12 [Bot] and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum