Canadian Airgun Forum
https://www.airgunforum.ca/forums/

What Did You Do To Your Airgun Today?
https://www.airgunforum.ca/forums/topic74188-450.html
Page 31 of 32

Author:  IanV [ Sun Nov 03, 2019 4:40 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Just polished a T06 trigger unit's sears and contact points. The original blade grub screws (which were kind of flat) have been replaced with ones from a spare TX CD blade (which are more rounded). Lubed with STP+moly mix for metal to metal and 3 in 1 oil for all the pins. Whereas the stock unit was mushy on the second stage, now the second stage is very defined and breaks very crisply at about 13 Oz. Can't wait to shoot this rifle again... which will probably be in spring. LOL.

One drawback now that everything's been stripped, polished and relubed with better lubes is the pin (biggest, front most) holding the sear that holds the spring for the latch sear is drifting with every shot. Yikes! Absolutely, potentially disastrously not good. Going to steal Hector Medina's idea of putting starlock washers on the pins.

Attachments:
T06_1.jpg
T06_1.jpg [ 577.75 KiB | Viewed 333 times ]
T06_2.jpg
T06_2.jpg [ 170.76 KiB | Viewed 333 times ]

Author:  airmec [ Sun Dec 22, 2019 5:12 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

I made some bronze washers for the barrel pivot of an upcoming project. 0.062'' thick, ID 0.340'', OD 0.700'' is a perfect fit.

Attachments:
bronze_washers.JPG
bronze_washers.JPG [ 58.54 KiB | Viewed 218 times ]

Author:  airmec [ Sat Jan 11, 2020 5:24 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

I made this to go with my current project. Body is 4140 steel, cone is 304 SS.

Attachments:
air_stripper.JPG
air_stripper.JPG [ 40.06 KiB | Viewed 177 times ]

Author:  pistolero [ Sat Jan 11, 2020 5:32 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Made a wood stock for my PP700SA still no yet finish, finalizing the small details

Attachments:
Stock.jpg
Stock.jpg [ 93.63 KiB | Viewed 174 times ]

Author:  airmec [ Sat Jan 11, 2020 5:34 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

pistolero wrote:
Made a wood stock for my PP700SA still no yet finish, finalizing the small details


Nice job! What wood did you use?

Author:  Dukemeister [ Sat Jan 11, 2020 5:35 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

pistolero, that looks amazing! :drinkers:

Author:  pistolero [ Sat Jan 11, 2020 6:14 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

airmec wrote:
pistolero wrote:
Made a wood stock for my PP700SA still no yet finish, finalizing the small details


Nice job! What wood did you use?


I use Oak for the stock, I'm still planning of adding an adjustable cheek rest to make it nice

Author:  pistolero [ Sat Jan 11, 2020 6:15 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Dukemeister wrote:
pistolero, that looks amazing! :drinkers:

Thanks

Author:  wesb2007 [ Sat Jan 11, 2020 6:53 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Very nice!

Sent from my EML-L09 using Tapatalk

Author:  airmec [ Sat Jan 11, 2020 9:22 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

I also modified a piston and made a teflon seal. Total piston length (including the seal) is shorter by 0.100''. The seal is held in place by a screw threaded into a bronze top hat.

Attachments:
piston_seal.JPG
piston_seal.JPG [ 43.79 KiB | Viewed 133 times ]
top_hat.JPG
top_hat.JPG [ 37.39 KiB | Viewed 133 times ]
shorter_piston.JPG
shorter_piston.JPG [ 61.47 KiB | Viewed 133 times ]

Author:  Ace [ Sat Jan 11, 2020 9:43 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

that's a nice job
what did you use to hold it in place a locking washer or some blue loctite
i'm sure it will start to come loose otherwise ?

Author:  airmec [ Sat Jan 11, 2020 9:46 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Ace wrote:
that's a nice job
what did you use to hold it in place a locking washer or some blue loctite
i'm sure it will start to come loose otherwise ?


I used blue loctite :wink:

Author:  Daryl [ Mon Jan 13, 2020 2:23 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

I looked at them in the gun room and fondled a couple. :shock:

Author:  tango [ Mon Jan 13, 2020 4:07 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

Daryl wrote:
I looked at them in the gun room and fondled a couple. :shock:


minus 41 this morning so I did the same. Its gonna got down to -46 tonight. Wonder what my 2240 would shoot like in the morniing?

Author:  Daryl [ Tue Jan 14, 2020 2:28 pm ]
Post subject:  Re: What Did You Do To Your Airgun Today?

A Balmy -34 here.

Page 31 of 32 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/