Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Merry Christmas to Me !!! https://www.airgunforum.ca/forums/topic78154.html |
Page 1 of 6 |
Author: | wheeliehd [ Mon Dec 25, 2017 5:18 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
Very Nice. Does she have a sister? LOL J/K |
Author: | jckstrthmghty [ Mon Dec 25, 2017 5:37 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
Dang. All I'm getting is a treadmill. The wife is trying to tell me something? Congrats on the great gift. |
Author: | Doc Sharptail [ Mon Dec 25, 2017 7:27 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
What diameter is the bbl? Is it a plain 78, or the heavier 14 mm "a" series? Ran into the nose dive curves with the un-modified qb valve on my home build. My solution was backing off on the hammer spring, and slightly lightning the poppet return.... Not quite the speed you're getting, but still a respectable fairly flat mid 7's with the jsb heavies. My strings were actually 19 shots, but for the sake of consistent velocities I refill at 17 shots.... -D.S. |
Author: | HuskyDude [ Mon Dec 25, 2017 9:34 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
That's a beautiful rifle!! Just love that BSA 4-14 x 44 scope too. Thx for all the test results are you going to stick with the JSB 25.4 gr. ? |
Author: | rsterne [ Mon Dec 25, 2017 10:43 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
Barrel is 14mm diameter, same as the standard QB, not the 15mm diam. version found on the deluxe.... The main tube is larger than a QB, at 26mm OD instead of 22mm.... don't know about the wall thickness yet, whether 1.5 mm or 2 mm (likely the latter).... Either way, it will be a lot bigger than the 19mm ID of a QB tube.... I am hopeful that after modding I can shoot the new, redesigned 25.4 gr. JSB Monsters, they are supposed to be a lot more accurate in many more barrels.... I only had one gun that liked the old ones, with the cylindrical middle, and that was my B-51 (now sold).... It shot them lights-out at 50 FPE.... AGS carries the new Redesigned ones.... https://www.airgunsource.ca/en/jsb-matc ... al-25.html I just ordered some.... If I can make this puppy breathe well enough to hit 50+ FPE, they should be just the ticket.... or alternately my 27.4 gr. BBT HP bullets.... or the 29.6 gr. FN solids.... These are the wound channels from the very similar .25 cal BBTs.... about 900 fps in melt-and-pour soap.... HP above, FN below.... The HPs are vicious the way they open up.... These were recovered from the soap block above.... FN at top, HP at bottom.... I haven't got enough experience with them yet to know the ideal size for optimum accuracy, and that will be different with this barrel anyways, most likely.... but they sure make a mess of a GS or Marmot.... Bob |
Author: | Ace [ Mon Dec 25, 2017 11:05 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
congrats on the new toy Bob... |
Author: | Buster95 [ Tue Dec 26, 2017 12:08 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
I have exactly the same rifle but I haven't try it yet because I don't have a hand pump. |
Author: | Buster95 [ Tue Dec 26, 2017 3:58 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
Seal kit exist for this rifle? |
Author: | lauchlin [ Tue Dec 26, 2017 4:47 pm ] |
Post subject: | Re: Merry Christmas to Me !!! |
LoL I have been look at that gun i sold all my pcp gun and almost all my other but now your not helping Bob .. |
Page 1 of 6 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |