Canadian Airgun Forum https://www.airgunforum.ca/forums/ |
|
Best supplier for PCP https://www.airgunforum.ca/forums/topic78970.html |
Page 1 of 1 |
Author: | mac100 [ Fri Mar 16, 2018 5:52 pm ] |
Post subject: | Best supplier for PCP |
Does anyone know a good supplier for one stop shopping for pcp products. I’m looking for a male 1/8”npt connector with built in check. A 3000/1100-1250psi 13ci bottle. A few 1.8k burst disks and male paintball x 1/8” female adapter like the one that comes with the hose kit. Also 25 cal predator alloy pellets. Seems like I have to go to about 3 or 4 sites to complete this list. |
Author: | wesb2007 [ Fri Mar 16, 2018 10:57 pm ] |
Post subject: | Re: Best supplier for PCP |
Here's the paintball tank and 1200psi regulator I bought and check valve foster fitting and 1.8k burst disks. I'm not sure what you meant by the other thing but it's probably there too, lol. Pellets unfortunately you'll have to look to airgunsource.ca I'm guessing, or one of the other airgun vendors. New Paintball PCP HPA 4500PSI Compressed Air Tank Regulator Output Pressure 1200PSI http://s.aliexpress.com/67ruYRnq?fromSns=Copy to Clipboard 0.22L 13Ci HP Air Tank/cylinder for Paintball Control Gas High Pressure Tank http://s.aliexpress.com/Bji2IZzm?fromSns=Copy to Clipboard New Paintball PCP HPA/CO2 Tank Valve Burst Disk 1.8K , 3K , 4.5K , 7.5K For Compressed Air Co2 Tank Regulator Valve http://s.aliexpress.com/VfieMnMz?fromSns=Copy to Clipboard New Paintball PCP 8MM Male Quick Head Connection Check Valve One Way Foster Stainless Steel Fill Nipple M10*1 http://s.aliexpress.com/3uEbeABR?fromSns=Copy to Clipboard Sent from my LG-H812 using Tapatalk |
Author: | HuskyDude [ Sat Mar 17, 2018 1:00 am ] |
Post subject: | Re: Best supplier for PCP |
If you don't want to wait a week or two...for delivery...and don't mind spending a LOT more money... Hit up you local Paint Ball Shop!!! Gotta be a few from Fort Erie to TO. Most don't mind the wait and save big time with Ali Express. |
Author: | mac100 [ Sat Mar 17, 2018 4:40 am ] |
Post subject: | Re: Best supplier for PCP |
Thank you very much for the hard work on the links. This is exactly what I’m looking for. I don’t mind the wait to save money. I like Airgun source and scopes and ammo (Eric) and will continue to use them but sometimes it’s too costly to buy little orders with shipping it gets pricey. Thanks again guys. |
Author: | Watertown [ Sat Mar 17, 2018 10:47 am ] |
Post subject: | Re: Best supplier for PCP |
Also keep in mind a good supplier. http://www.airtanksforsale.com/ |
Author: | wesb2007 [ Sat Mar 17, 2018 11:44 am ] |
Post subject: | Re: Best supplier for PCP |
You're welcome. Is this the other fitting you were looking for? Freeshipping pcp paint accessories Paintball CO2 HPA Compressed Air Fill Fitting Female Quick Disconnect 1/8 NPT http://s.aliexpress.com/NziUrmI3?fromSns=Copy to Clipboard Sent from my LG-H812 using Tapatalk |
Author: | HuskyDude [ Sat Mar 17, 2018 12:21 pm ] |
Post subject: | Re: Best supplier for PCP |
I ordered a couple of these, that just came in. Wanted the slide check vlv more than anything for my Reg tester I'm making. Good price too. Slide Check With Quick Disconnect I'm glad they came in cuz my quick connect on the hpa hand pump I have started to leak...always good to have spare parts... |
Author: | wesb2007 [ Sat Mar 17, 2018 4:46 pm ] |
Post subject: | Re: Best supplier for PCP |
Nice, those are nice and narrow. The slide checks I bought are quite wide, little more awkward in tight spots. Sent from my LG-H812 using Tapatalk |
Author: | mac100 [ Wed Mar 21, 2018 4:12 am ] |
Post subject: | Re: Best supplier for PCP |
HuskyDude wrote: I ordered a couple of these, that just came in. Wanted the slide check vlv more than anything for my Reg tester I'm making. Good price too. Slide Check With Quick Disconnect I'm glad they came in cuz my quick connect on the hpa hand pump I have started to leak...always good to have spare parts... That’s the one. You guys have been so helpful. This site is great and the prices are pretty good |
Author: | wesb2007 [ Wed Mar 21, 2018 5:54 am ] |
Post subject: | Re: Best supplier for PCP |
[emoji106] glad to help [emoji5] Sent from my LG-H812 using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |