Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Diana Outlaw
https://www.airgunforum.ca/forums/topic81332.html
Page 1 of 2

Author:  Daryl [ Wed Nov 28, 2018 3:29 pm ]
Post subject:  Diana Outlaw

Amazingly accurate: 45 yards testing. Amazing!
Wonder if this one could be de-silenced for the Canadian market as-was the Gauntlet?
https://www.youtube.com/watch?v=WnSMttQOh9A

Author:  wesb2007 [ Wed Nov 28, 2018 11:22 pm ]
Post subject:  Re: Diana Outlaw

I've heard they'll be available in Canada eventually. How about it's cousin, the M11 =), New improved version? This one should be arriving in January =)

Sent from my EML-L09 using Tapatalk

Author:  Doc Sharptail [ Thu Nov 29, 2018 4:44 am ]
Post subject:  Re: Diana Outlaw

Where have I seen that shallow checkering and trigger block only safety before? :mrgreen:

He makes a good point about getting the preservative out of the bore. This applies to all the Snow Peak / Artemis / CP-1 / Chaser / Dragonfly line.

These guns will not group with that black grease in the bore. It ALL has to be cleaned away.
Not sure if the breech seal is the same as the above listed guns. If it is, he should have removed it before putting the solvent soaked patch through the bore.

Impressive numbers and grouping for .22 cal....

-D.S.

Author:  Daryl [ Thu Nov 29, 2018 2:08 pm ]
Post subject:  Re: Diana Outlaw

wesb2007 wrote:
I've heard they'll be available in Canada eventually. How about it's cousin, the M11 =), New improved version? This one should be arriving in January =)

Sent from my EML-L09 using Tapatalk



Interesting, will have to wait and see.

Author:  Daryl [ Thu Nov 29, 2018 4:29 pm ]
Post subject:  Re: Diana Outlaw

Here's another:
https://www.youtube.com/watch?v=PprI9is2WBY

here's another - same action, different tank & stock bobbed.

https://www.youtube.com/watch?v=XnQiq3bD_zA

Author:  DocGadget [ Thu Nov 29, 2018 6:34 pm ]
Post subject:  Re: Diana Outlaw

Daryl wrote:
Amazingly accurate: 45 yards testing. Amazing!
Wonder if this one could be de-silenced for the Canadian market as-was the Gauntlet?
https://www.youtube.com/watch?v=WnSMttQOh9A

Wouldn't it just be easier to legalize silencers? :lol:

Author:  wesb2007 [ Fri Nov 30, 2018 11:21 am ]
Post subject:  Re: Diana Outlaw

That would sure simplify things!
Here is how the m11 will look with the silencer off. (sorry, slightly off topic. I'm guessing Diana will do something similar with the outlaw when they bring it in to Canada). Image

Sent from my EML-L09 using Tapatalk

Author:  Daryl [ Fri Nov 30, 2018 11:36 pm ]
Post subject:  Re: Diana Outlaw

Looking good to me. I actually didn't mind the one Si was testing for the second vidio link I posted.

Same gun, same magazine, different tank, different forend.

https://www.youtube.com/watch?v=XnQiq3bD_zA

Appears to be this one? Any idea on cost?

Attachments:
Artemis M11.jpg
Artemis M11.jpg [ 2.91 KiB | Viewed 1188 times ]

Author:  Daryl [ Fri Nov 30, 2018 11:47 pm ]
Post subject:  Re: Diana Outlaw

Some of these look pretty good.

https://www.google.com/search?q=Diana+M ... 40&bih=322

Author:  wesb2007 [ Fri Nov 30, 2018 11:57 pm ]
Post subject:  Re: Diana Outlaw

Daryl wrote:
Looking good to me. I actually didn't mind the one Si was testing for the second vidio link I posted.

Same gun, same magazine, different tank, different forend.

https://www.youtube.com/watch?v=XnQiq3bD_zA

Appears to be this one? Any idea on cost?
Same one, yep but a newer version with a checkered stock, regulator, degasser and better sound moderator (boohoo not for us of course!)

Sent from my EML-L09 using Tapatalk

Author:  Buster95 [ Sat Dec 08, 2018 2:54 pm ]
Post subject:  Re: Diana Outlaw

wesb2007 wrote:
I've heard they'll be available in Canada eventually. How about it's cousin, the M11 =), New improved version? This one should be arriving in January =)

Sent from my EML-L09 using Tapatalk


The main difference between the outlaw and the M11 is side lever action vs bolt action?

Author:  wesb2007 [ Sat Dec 08, 2018 7:31 pm ]
Post subject:  Re: Diana Outlaw

That's right, m11 is bolt action. Same magazine and barrel and tube, regulator, etc.

Sent from my EML-L09 using Tapatalk

Author:  kayakee [ Mon Jul 01, 2019 9:04 am ]
Post subject:  Re: Diana Outlaw

Hi airgunner folks,
Since the last post was in december 2018 and looking on all canadian sellers yesterday without find one available, is someone have recent news concerning a canadian version?

Author:  wesb2007 [ Mon Jul 01, 2019 9:32 am ]
Post subject:  Re: Diana Outlaw

The Diana distributor has been very delayed in bringing anything in. I know they have some Diana Chaser kits coming in around now, and Diana Stormrider. They couldn't tell me if they'd ordered anything else other than the Diana Bandit aka PP800. The manager in charge retired and it seems their order got put on hold and maybe reduced, but we'll see.

I was wrong earlier when I said the M16 was the same basic parts as the M11, only a different breech. My mistake. The M16 actually has a different style pressure tube, so unfortunately the M16 side lever breech doesn't interchange.





Sent from my EML-L09 using Tapatalk

Author:  Knappr [ Thu Dec 19, 2019 12:49 pm ]
Post subject:  Re: Diana Outlaw

Well time to resurrect this thread. Lol

So I’m shopping, researching my next PCP purchase and the ‘outlaw’ is on the list as too many others. But I have questions.

1) this rifle is made by SP, then why the $650-700 price point? For a couple hundred more I could be shooting a FX streamline.

2) are these rifles the budget line in which I need to completely strip, debur before first use in order to get consistency and reliability? I’d hope not.

Thanks

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/