Canadian Airgun Forum
https://www.airgunforum.ca/forums/

I have a bit of a problem.
https://www.airgunforum.ca/forums/topic82457.html
Page 1 of 1

Author:  wheeliehd [ Sat Mar 30, 2019 6:37 pm ]
Post subject:  I have a bit of a problem.

I have a QB78S and a QB Chief. The safety on them is on opposite sides. So on one the arrow points backward when off and forward on the other one when off. Both guns are stock. I would like them the same so it does not confuse me when the safety is on or off. Can one be changed easy? Which side is the proper side? To me the arrow should be pointing down the barrel when off but who knows with China. LOL CHEERS!

Author:  pistolero [ Sat Mar 30, 2019 6:51 pm ]
Post subject:  Re: I have a bit of a problem.

You can punch it out first and reattached from the other side. watch this
https://www.google.ca/search?source=hp& ... 3989784919

Author:  wheeliehd [ Sat Mar 30, 2019 7:26 pm ]
Post subject:  Re: I have a bit of a problem.

Thank you. Stole some wood dowel out of wife's craft kit. cChanged the QB Chief cause to me the arrow pointing up the barrel the safety would be off. direction of flow if you think of pellet. Arrow to back of gun would not shoot so safety on. Same as gas and water valves if the handle is inline it is open and handle goes across it is closed. Likely not the smartest thing to do with 2000lbs of air in the gun. But it worked. 8) CHEERS!

Everyone else's safety off when it is inside your trigger guard? Arrow is on opposite side of safety lever.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/