Canadian Airgun Forum

The #1 Community for Airguns in Canada!
It is currently Thu Apr 25, 2024 2:20 pm

View unanswered posts | View active topics


Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours


The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

 

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Canadianguy
PostPosted: Sat Nov 30, 2019 2:31 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
I polished the trigger and when putting everything back together. The safety on the right side if you in a stance position keeps falling off. It seems they have a brass little barrel inside. The 2 safety come into one, but nothing else is holding it on. The left safety is fine with no problem.

Also there was a little spring inside not sure how it fit, but everything seems to be working....thank god it's back together lol...

Anyone torn there down?

Greg


Attachments:
KWC 1911 Tac.jpg
KWC 1911 Tac.jpg [ 418.41 KiB | Viewed 1281 times ]

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
Daryl
PostPosted: Sat Nov 30, 2019 5:58 pm 
Offline

Joined: Wed Jan 05, 2011 12:35 pm
Posts: 11367
Location: P.G. B.C.
The real (powder burner) one, yes - that one is different.
On the 1911 colt, the aftermarket ambi-safeties are one piece.

_________________
Best Wishes
Daryl
Top
 Profile  
 
silentman
PostPosted: Sat Nov 30, 2019 6:01 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
The pin that hold (pivot) the back safety and the hammer (I think) should get true on the right side about 1/8 and provide for the slot on the inside of the right safe lever...

On the picture the pin is incorrectly (not pushed far anough) inserted...

SilentMan...


Attachments:
File comment: left down is the slot and top right is where the pin should stick out about 1/8 so the engage in the slot...
safety.jpg
safety.jpg [ 326.15 KiB | Viewed 1258 times ]

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.
Top
 Profile  
 
Canadianguy
PostPosted: Sat Nov 30, 2019 6:10 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Both sides of the safety work fine, the left side just keeps falling off. If you look, the post on each safety that go inside have a brass cap around them and one pin is notched so the other pin slides into it.

That little spring happens to be the firing pin spring whoops....that's why it's not shooting any co2 but dry fires fine Back in I go, i just watched a video i see how the spring goes now....thank good for you tube!

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
Canadianguy
PostPosted: Sat Nov 30, 2019 6:13 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
silentman wrote:
The pin that hold (pivot) the back safety and the hammer (I think) should get true on the right side about 1/8 and provide for the slot on the inside of the right safe lever...

On the picture the pin is incorrectly (not pushed far anough) inserted...

SilentMan...


Ohhhh....ty Silentman ill give it a try):

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
leadslinger
PostPosted: Sun Dec 01, 2019 9:46 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
https://www.youtube.com/watch?v=5eXkCsttNP0

4:20 he starts putting in the safety.

Shows he put in the right side first, the bushing, then the left.

Tip for the plunger spring detent is push it in with a screw driver, as you push in the safety.


Last edited by leadslinger on Sun Dec 01, 2019 9:50 am, edited 1 time in total.

Top
 Profile  
 
leadslinger
PostPosted: Sun Dec 01, 2019 9:49 am 
Offline

Joined: Mon Aug 08, 2016 7:23 am
Posts: 4259
Location: Somewheres near the Atlantic
silentman wrote:
The pin that hold (pivot) the back safety and the hammer (I think) should get true on the right side about 1/8 and provide for the slot on the inside of the right safe lever...

On the picture the pin is incorrectly (not pushed far anough) inserted...

SilentMan...


On a 1911, the safety will keep the hammer pin in. If you try and use the pin to hold the safety it will back out. posted a video on the disassembly of it. He seems like it put it in backwards. Need to start with the right then the left.
Top
 Profile  
 
silentman
PostPosted: Sun Dec 01, 2019 3:31 pm 
Offline
User avatar

Joined: Fri Oct 18, 2013 7:37 pm
Posts: 1101
Location: Montreal area
silentman wrote:
The pin that hold (pivot) the back safety and the hammer (I think) should get true on the right side about 1/8 and provide for the slot on the inside of the right safe lever...

On the picture the pin is incorrectly (not pushed far anough) inserted...

SilentMan...


on the right side the pin is not flush, it must stick out so it catch in the slot inside the right side safety, it's that slot that prevent it to fell off.


Attachments:
File comment: left circle is the screw holding the left side safety, the right circle shows the part that must stick out so the slot on the right safety lever engage into it.
IMG_6750B.jpg
IMG_6750B.jpg [ 62.4 KiB | Viewed 1131 times ]

_________________
4.5mm
To many and not enough.

6mm
Not enough and to many.
Top
 Profile  
 
Canadianguy
PostPosted: Mon Dec 02, 2019 7:39 pm 
Offline
User avatar

Joined: Tue Mar 12, 2013 1:35 pm
Posts: 1154
Location: North Of Toronto
Sorry late getting back....Thanks for all the help and videos i never seen:) The pin is sticking out some it's just the way the pic is everything is back together and greased. Very happy!

I have to say I really love this thing, with a little laser underneath, it fits my hand great. My first blow back was that sig x5 open bb but it felt big in my hand. So lately I was wondering about the Sig M17 320 pellet, also the P226 more like to try the M17 like to check one out, just trying to get get some cash together

_________________
Benjamin Discovery .22
Crosman DPMS SBR .BB
Crosman 2240 HPA .22
S&W M29 8 3/8" Pellet
Dan Wesson 715 Nickel 6" Pellet
Sig Sauer M17 Pellet
KWC 1911 Tac .BB
Leapers UTG BB 3x12x32
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO