fx 2000

View unanswered posts | View active topics

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours

The Canadian Airgun Forums are a place for people to discuss and learn about airguns and the airgunning sport in Canada. There are lots of discussions about airguns, airgun accessories, reviews, modification and repair information, airgun events, field target and free classifieds!

You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

miklos

Post subject: fx 2000

Posted: Sun Nov 12, 2006 12:09 pm

Joined: Wed Sep 20, 2006 1:10 pm
Posts: 8
Location: tyoltyur

hello!
how can I increase the power of the gun, as in my country there is no limit for speed? In the manual is written: ”To adjust the power, remove the stock, then remove the air transfer port restrictor lockscrew, located on the right hand side of the cylinder. Turn the restrictor screw counter- clockwise to increase the velocity and clockwise to reduce the velocity. When adjustments have been completed, apply Loctite 542 to the air transfer port restrictor lockscrew ” – but I can’t find out “the air transfer port restrictor lockscrew”; here are some photos: http://s58.photobucket.com/albums/g251/ ... 20fintina/ !
thank you very much!!!

Top

sniper

Post subject:

Posted: Sun Nov 12, 2006 2:03 pm

Admin-2-IC

Joined: Thu Sep 01, 2005 5:19 pm
Posts: 9762
Location: On, CA

Hi Miklos,

I would guess, the port restrictor would be anything that is blocking
part # 32 which is the transfer port, you might have to do a little
investigation there follow to what #32 leads from ... my guess would
be #75.

Top

miklos

Post subject:

Posted: Sun Nov 12, 2006 3:12 pm

Joined: Wed Sep 20, 2006 1:10 pm
Posts: 8
Location: tyoltyur

sniper wrote:

....I would guess, the port restrictor would be anything that is blocking
part # 32 which is the transfer port, you might have to do a little
investigation there follow to what #32 leads from ... my guess would
be #75.

- " located on the right hand side of the cylinder" --- no #66 ????? I think it's n° 3 on the first picture. Remove that screw and underneath is the adjustment screw. - http://s58.photobucket.com/albums/g251/ ... 20fintina/

Top

sniper

Post subject:

Posted: Sun Nov 12, 2006 9:43 pm

Admin-2-IC

Joined: Thu Sep 01, 2005 5:19 pm
Posts: 9762
Location: On, CA

miklos wrote:

" located on the right hand side of the cylinder" --- no #66 ????? I think it's n° 3 on the first picture. Remove that screw and underneath is the adjustment screw. - http://s58.photobucket.com/albums/g251/ ... 20fintina/

Yes, I think that's it, I looked at the diagram, it leads to the port on that
cylindrical assy.

Top

Page 1 of 1

[ 4 posts ]

Board index » Main Forum » General Airgun Chat

All times are UTC - 5 hours

Who is online

Users browsing this forum: lauchlin and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum