Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Scope for a Tx 200 HC .22
https://www.airgunforum.ca/forums/topic87163.html
Page 1 of 1

Author:  zuluyou [ Fri Nov 13, 2020 7:32 am ]
Post subject:  Scope for a Tx 200 HC .22

As Tpoic States, Looking for recommendations for scope for an AirArms TX 200 HC .22.
Appreciate all help and info.

Regards Mark

Author:  Mac [ Fri Nov 13, 2020 7:54 am ]
Post subject:  Re: Scope for a Tx 200 HC .22

Hard to recommend without knowing the intended use. Regardless of what you want to use it for, be sure to get a spring gun rated scope. They cost more when you buy, but it is better than buying cheap and breaking them a few times before ending up with a scope that can withstand the recoil.

I like 4-16X scopes because of their versatility. Hawke and Discovery make some decent spring gun rated scopes.

Author:  Daryl [ Fri Nov 13, 2020 1:21 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

As well, Leapers scopes are what I have on my springers, HW97's.
I am running 2 of these. Unfortunately, D&L are out of stock at this time.
I should mention at this time, that the shorter length scopes are more suitable
for the underlever rifles, due to the position of the loading port. A scope shorter than
13" is best.

https://dlairgun.com/collections/leaper ... 7465723964

Attachments:
HW 97s resized2.jpg
HW 97s resized2.jpg [ 428.44 KiB | Viewed 330 times ]

Author:  jckstrthmghty [ Fri Nov 13, 2020 2:16 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

I agree with Mac, intended purpose would help with the recommendations. I put a Hawke 4x16 40 Airmax on my tx for general use and works very well for that task. I chose that scope for the thin lines of the reticle which I love. No issues with access to the loading port.

Author:  YepYep [ Fri Nov 13, 2020 3:37 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

Have the similar 4-12x40 AirMax on my Pro Sport. Although the scope was not choosed by me and just came with the rifle when I bought it, I love that scope too. In general I don't need very high power by just actually 8x will be good enough for my indoors shooting, I will pick the same scope again if I bought it by myself ~

Author:  tom_ke888 [ Sat Nov 14, 2020 9:59 am ]
Post subject:  Re: Scope for a Tx 200 HC .22

I have a Discovery HS 4-14X44 SF FFP MIL Light-Weight 2018 Model 585g! from Wes on my TX200 with low rings. It works great and is springer rated. I think is a good fit for the TX200.



通过我的 TAS-AL00 上的 Tapatalk发言
Image

Author:  Hobbyman2007 [ Sun Nov 15, 2020 9:12 am ]
Post subject:  Re: Scope for a Tx 200 HC .22

Here’s what I’ve got mounted to one of my guns and love it . https://airgunarcheryfun.ca/vector-mark ... cope-570g/
The only downfall is the 12yard focus. Great glass and reticle for the price not to mention the weight is very low.

Author:  Mac [ Sun Nov 15, 2020 9:00 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

If it does not specifically say, Spring gun rated, don't buy it. It will eventually loosen up and point of impact will start to wander. Don't throw your money away.

Take a look at this for $30 more. It is springer rated.

https://airgunarcheryfun.ca/discovery-v ... -shipping/

Author:  rob g [ Sun Nov 15, 2020 9:35 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

You need to first decide your budget. A simple email to the manufacturer with your intended use will get you confirmation of their warranty and if use on a spring rifle is acceptable.

I recently bought a Falcon Gen2 5-30 FFP scope. It has a 10 year warranty and is covered for use on a springer. I purchased a Hawke Sidewinder in the spring. It is lifetime warranty to the original purchaser and is springer rated. Vortex stated their scopes have a lifetime warranty.

Author:  zuluyou [ Tue Nov 17, 2020 8:13 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

Decided to purchase The Discovery ED 4-16 x50 SF FFP cope.....We will see how this performs

Thank you to All

Regards Mark

Author:  Daryl [ Tue Nov 17, 2020 8:34 pm ]
Post subject:  Re: Scope for a Tx 200 HC .22

Good stuff, I'm sure you will be happy with it.

That is a really nice scope - so nice, I just ordered one from Wes.
I'm going to put it on my 6.5x55 Varberger (Made in Sweden) The reticle will
get me on the buffalo at 1,000metres without touching the elevation turret. COOL!

Specification

Brand Name:Discovery

Line Name:ED

Magnification:4X-16X

Reticle Focal Plane:First focal plane

Field of view(degrees):6.6*-1.32*

Exit pupil:3.13mm- 10mm

Exit pupil distance(mm)(Eye relief):100mm-85mm

Click Value:1/10MIL

Max Elevatin adjust range(MIL):24MIL

Max Windage adjust range (MIL):24MIL

Effective objective lens diameter(mm):50mm

Tube diameter(mm):30mm

Illuminated:NO

Length(mm):312mm

Weight(g):625g

Adjust Focus:Side Parallax (10yds~oo)

Shock-Proof:1500g (magnum springer rated)

Water-Proof:10Min

Fog-Proof:YES

Nitrogen Filled:YES



Package

1. DISCOVERY ED 4-16X50SF *1pcs

2. Lens Cover *1pair

3. Sunshade *1pcs

4. A free pair of scope mount
Key Features

ED FCD100 HOYA glasses provide a extremely low chromatic dispersion, bright and sharp image.
One piece T-6061 aircraft aluminum with full CNC machined and hard anodized scope tube, accurate and solid.
5x times optical design provide a long range power for long range shooting and hunting.
Objective Fixed technology makes the ED line more reliable and recoil proof for big caliber and lifetime use.
Positive Pressure Nitrogen Filled, 10 meters waterproof and premium fog proof performance.
Side focus from 10 yards and comes with a side wheel for easier using.

Author:  Hobbyman2007 [ Thu Nov 19, 2020 7:18 am ]
Post subject:  Re: Scope for a Tx 200 HC .22

These inexpensive Discovery scopes sure are nice .

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/