Canadian Airgun Forum
https://www.airgunforum.ca/forums/

Does a CO2 pistol with a 1/2-20 NF threaded barrel exist?
https://www.airgunforum.ca/forums/topic87221.html
Page 1 of 2

Author:  Threemorewishes [ Sat Nov 21, 2020 1:52 pm ]
Post subject:  Does a CO2 pistol with a 1/2-20 NF threaded barrel exist?

Hello CAF,

I'm looking for a CO2 powered pistol with a 1/2-20 NF threaded barrel. Does such a pistol exist?

Thanks for any input you may have.

Threemorewishes

Author:  pistolero [ Sat Nov 21, 2020 2:21 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Here is the newer Crosman 2240 XL
https://airgunarcheryfun.ca/crosman-224 ... el-breech/

Author:  Threemorewishes [ Sat Nov 21, 2020 5:13 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Thanks for the info.

It's a possibility if I cannot find something a little more replica like.

Author:  YepYep [ Sat Nov 21, 2020 6:30 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

My Chaser comes with the treaded muzzle should be that size... It's not a replica tho...

Then my NightHawk (CP99) comes with treaded muzzle which for its fake silencer too... But it's a smaller size on the 177 caliber barrel... ImageImageImage

Author:  leadslinger [ Sat Nov 21, 2020 8:39 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Unfortunately not many replica come with that thread pitch..

You would need an adapter for things like the Sig 226 Airgun, Umarex SA10, Beretta 92A3. Which I believe they have threaded barrels.

YepYep, Chaser is M10X1 pitch FYI, not 1/2-20.

Author:  leadslinger [ Sat Nov 21, 2020 8:42 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Oh the Webley Nemesis is Co2, and believe it has a 1/2-20 threaded barrel.

Author:  Threemorewishes [ Sun Nov 22, 2020 6:22 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

YepYep wrote:
My Chaser comes with the treaded muzzle should be that size... It's not a replica tho...

Then my NightHawk (CP99) comes with treaded muzzle which for its fake silencer too... But it's a smaller size on the 177 caliber barrel...


Thanks for the information.

The Chaser sure has a distinctive look. Is it a good shooter?

Author:  Threemorewishes [ Sun Nov 22, 2020 6:23 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

leadslinger wrote:
Unfortunately not many replica come with that thread pitch..

You would need an adapter for things like the Sig 226 Airgun, Umarex SA10, Beretta 92A3. Which I believe they have threaded barrels...


Thanks for the information.

Are the adapters for the P226 threaded barrels to 1/2-20 UNF readily available in Canada?

Author:  YepYep [ Sun Nov 22, 2020 6:36 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Threemorewishes wrote:
The Chaser sure has a distinctive look. Is it a good shooter?


It's okay~ feels like my lightly modes 2240...

Author:  leadslinger [ Sun Nov 22, 2020 6:58 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Threemorewishes wrote:
leadslinger wrote:
Unfortunately not many replica come with that thread pitch..

You would need an adapter for things like the Sig 226 Airgun, Umarex SA10, Beretta 92A3. Which I believe they have threaded barrels...


Thanks for the information.

Are the adapters for the P226 threaded barrels to 1/2-20 UNF readily available in Canada?


No, because other than air strippers, only other thing that comes in that thread are "those that shall not be named"

Author:  Threemorewishes [ Sun Nov 22, 2020 7:22 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

leadslinger wrote:
Threemorewishes wrote:
leadslinger wrote:
Unfortunately not many replica come with that thread pitch..

You would need an adapter for things like the Sig 226 Airgun, Umarex SA10, Beretta 92A3. Which I believe they have threaded barrels...


Thanks for the information.

Are the adapters for the P226 threaded barrels to 1/2-20 UNF readily available in Canada?


No, because other than air strippers, only other thing that comes in that thread are "those that shall not be named"


No worries. It's for a barrel extension "prop" that when fired shoots out a red flag emblazoned with the word "BANG!" in bold black letters.

Thanks again.

Author:  leadslinger [ Mon Nov 23, 2020 6:34 am ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Threemorewishes wrote:
No worries. It's for a barrel extension "prop" that when fired shoots out a red flag emblazoned with the word "BANG!" in bold black letters.

Thanks again.


Kind of need an revolver for that.. Just like cartoons.

Stores in the UK, or Ebay might have adapters.

Author:  bigHUN [ Mon Nov 23, 2020 9:09 am ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

Not sure where do you live but for some accessories you can brows from airsoft stores as well, just open up google maps and type in search for airsoft.
Richmond Hill, Markham (ON) Toronto Northern suburbs have a good couple asian stores - in a close proximity 5-10 minutes drive - you would be amazed how these competing. Intersection of Hwy 404 and 407.
I've been to some places, the stores are impressive and the game is well developed in that neighbourhood. BC also have several big vendors.

Author:  Threemorewishes [ Mon Nov 23, 2020 1:41 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

leadslinger wrote:
Threemorewishes wrote:
No worries. It's for a barrel extension "prop" that when fired shoots out a red flag emblazoned with the word "BANG!" in bold black letters.

Thanks again.


Kind of need an revolver for that.. Just like cartoons.

Stores in the UK, or Ebay might have adapters.


I'm trying to modernize the cartoonish appeal with a semi auto real world replica. Thanks again.

Author:  Threemorewishes [ Mon Nov 23, 2020 1:43 pm ]
Post subject:  Re: Does a CO2 pistol with a 1/2-20 NF threaded barrel exist

bigHUN wrote:
Not sure where do you live but for some accessories you can brows from airsoft stores as well, just open up google maps and type in search for airsoft.
Richmond Hill, Markham (ON) Toronto Northern suburbs have a good couple asian stores - in a close proximity 5-10 minutes drive - you would be amazed how these competing. Intersection of Hwy 404 and 407.
I've been to some places, the stores are impressive and the game is well developed in that neighbourhood. BC also have several big vendors.


Thanks for the info. I never even thought of airsoft as a potential source. My nephews have a few modern looking replica airsoft pistols that might be just the ticket.

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/