rsterne wrote:
That solves that problem, but the pistol grip means it is still a handgun, and if over 500 fps, restricted.... What pressure is that tube/valve assembly designed for, Brent?.... It looks like it slides into the hammer tube?....
Bob
Bob
If you click on the link lauchlin provided you can find the specs and the assembly instructions. Basically the air tube and valve are a single unit, similar to what i have on my Hatsan AT44, the valve is on the end of the air tube. The tube is rated for 200 bar standard fill, 300 bar with a regulator (presumably the breach can't take more than 200 bar). You either need a custom tube or you have to cut the stock 2240 hammer tube to 88 mm (no tolerance given, but dire warnings it need to be 88). All in all, looks like a very elegant set up, and durable. When matched to the custom breach it will be a formidable piece. But I think lauchlin is going to need a shoulder stock for it!
i thought they were stuck in customs but no ..........I am going to need a stock folding i think not sure how they work with a power adjuster ?
